Windows 10: Local network problem

Three PC's
A: Windows 10x64 LTSB 1607 Fixed IP 192.168.0.10
B: Windows 10x64 LTSB 1607 Fixed IP 192.168.0.20
C: Windows 10x64 LTSC 1809 Fixed IP 192.168.0.30

A and B can connect to all parts of network

C can not connect to either A or B.

C can ping 192.168.0.10 but not 192.168.0.20 !?

On C I can attach another HDD with Windows 10x64 LTSB 1607 Fixed IP 192.168.0.30
and I have full connectivity!

Have tried every possible settings to no avail so looking for help.

:)

 

Cannot install local/network HP 1102 printer. administrator keeps blocking app.

Hi Chris,

• Is your Printer connected to a Local network or Domain network?
• Do you get any error message?

As an initial troubleshooting step, I suggest you to create a new user account and check if the same issue occurs here as well.

Here are the steps:

• Go to Settings.
• Choose Accounts and then select
  Family and other users.
• Select add someone else on this PC.
• Enter a user name and hit next.
• Click on Finish.
• Sign out from the current Account and Log into the new account.

Kindly get back to us with the above information and status of the issue to assist you further.

Thank You.

 

Network Adapter PROBLEM

Hi,

Thank you for posting in Microsoft Community.

First Verify if the WLAN service is started and set to automatic, if the WLAN service is stopped, I would suggest you to start the service and put it to automatic.

Step 1: Please follow the steps to
start the WLAN service.

• 
  Click on Start, type in services.msc
  and press Enter.
  
• 
  Select WLAN Autoconfig from the list, Right click
  properties.
  
• 
  Change the startup type to Automatic.
  
• 
  Click on Start button.
  
• 
  Click on Apply, Ok.
  

Restart the computer and verify if it works.

Also check if all the dependencies are also running. Try the steps to check Dependencies.

• 
  Right-click on WLAN Autoconfig and select Properties.
  
• 
  Click on Dependencies, you will find all the dependency services under box labeled this service depends on the following system components.
  

Step 2: Run an inbuilt Network troubleshooter.

• 
  Press Windows + X key and select
  Control Panel.
  
• 
  Type troubleshooting and select troubleshooting.
  
• 
  Click on view all on the left pane and select
  Network adapter.
  
• 
  Follow the on-screen steps and check.
  

I would also suggest you to check with the below link to check how to resolve wireless problems.

Refer:
Wired and wireless network problems

Keep us posted to help you better.

 

Local account installation question

I'm fairly certain that Skip this step was available in 10.0.130 - the workaround in Step 20 (back button) is no longer required.

The currently known, as of 10.0.130, ways to create a Local account sign-in are

• Skip this step at the MS account creation phase
• No Internet connection during the install
• static IP (post# 2 by Fragment) - New (to me anyway)