Windows 10: Cannot load from CD or USB

I volunteer for a non-profit job corps. They were given some PCs with Windows 8 on them. They want to upgrade to 10, but the previous owners do not allow the machine to boot from the CD or the USB. Of course, no one knows the BIOS passwords to turn it off. Is there a bypass or a software to help? Thanks!!

:)

 

HD 5870 Bios flash failed

mp3 player is in FAT / FAT32 format ?

Set Boot up first to the drive with hiren bootcd 10.4
Done...

the options will pop out after loading the disc choose

boot cd

then the list (step by step)

Next...
Dos....
USB Drivers....
Load USB Drivers with no386.....

Ask you load cd drivers. NO
Ask you load SCSI drivers. NO
Ask you anything NO.
USB driver list comes out. 8 Don't choose anything else.

type
C:\ (that should be your mp3 player if you did it right)

atiflash -i
to list the adapters

atiflash -p -f 0 ???.bin

done.........

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

clean possibly infected flash drives and CD-RWs

Your steps in post #1 should work for 99% of viruses that may be on a usb flash drive. However, there are a very few viruses that can infect the MBR of a drive. I would use Diskpart from a command prompt (Admin) to clean them. In the command prompt type DISKPART then, at the Diskpart prompt use the commands:

LIST DISKnote the disk number of the usb and use it in place of # in the command:SELECT DISK #
CLEAN
CREATE PARTITION PRIMARY

After this you will have cleaned the partition table from the usb and created a partition using the whole of the the available space. You can then format this partition in File Explorer.


For a CD-RW, if you right-click on it in File Explorer there is an Erase option.