Windows 10: Error Code 0xc0000428 on HP Envy running Windows 10

My external hard drive wasn't showing up as an option on my computer so I decided to reboot. I ended up with the Blue Screen of Death. The message reads:


Your PC needs to be repaired,

The digital signature for the file couldn't be verified,

Error code: 0xc0000428,

You'll need to use the recovery tools on your installation media. If you don't have installation media (like a disc or USB device) contact our system administrator or PC manufacturer."


I ran a back-up USB for recovery and that failed.


Does anyone have any other suggestions? Would replacing the hard drive fix this problem?


Thanks!

:)

 

What is windows error code: 0xc0000428

Can error code: 0xc0000428 be corrected by reloading Windows 10 software?

 

Unable to boot the device with error: 0xc0000428 on Windows 10

Hi Vuk,

Thank you for posting in Microsoft Community and being part of Windows 10.

I understand the inconvenience you are facing in booting the device with 0xc0000428 error. We will help you with this issue.

Do let us know the following to assist you better with this issue:

• What is the make and model of your device?
• What is the complete error message along with the error code of this issue?
• From when are you facing this issue?
• Have you make any hardware/ software changes to your device prior to this issue?

I would like to inform that when you attempt to start a Windows 10 system, the system fails to start normally and you receive an error:
0xc0000428 for the signed driver dlkmdldr.sys. Do confirm us if you are facing the same issue.

Try the below and check if it helps.

Step 1: I suggest you to remove all the external devices except mouse and keyboard, hard reboot the device and check if the issue persists.

Step 2: I suggest you to boot the device by choosing the "Disable Driver Signature Enforcement" mode from the advanced boot menu, you would be able to boot the system to the desktop.

• Try to boot the device to Windows Recovery Environment
• Click on Advanced options, Startup Settings
  and Restart.
• Once the computer restarts, press F7 key to start he device on
  Disable Driver Signature Enforcement mode.
• Check if the computer boot successfully.

Step 3: I suggest you to install the pending updates on your device after restarting the computer.

Steps:

• Connect to the internet.
• Press Windows key and type
  updates.
• Click on Check for updates.
• Under Windows Updates, click on
  Check for updates.
• Try to install the updates being shown.

Hope it helps. Try the above an update us the status of this issue to assist you further accordingly.

 

HP Envy Laptop Battery not charging after Windows 10 installation

Hi,

Thank you for posting on Microsoft Communities.

I suggest you to un-install and re-install battery drivers from Device manager and check. Follow the steps:

• Press Windows Key + X.
• Click on Device Manager.
• Expand Batteries and right click on Batteries ACPI and click on Un-install.
• Restart the computer and check.

If the issue persist, I suggest you to visit HP Envy website and check whether HP has released any firmware updates for Windows 10. If so, please go ahead and install them and check with the issue.