Windows 10: Windows 10 Start/Boot up error

I recently ran into an issue whilst turning on my pc, I would get a blue screen then it would restart and attempt an automatic repair, however, this wouldn't/hasn't worked and i would receive the error code "BadSystemConfigInfo" and I have tried different methods found online to try and resolve it. I have tried letting the Automatic Repair fix it, but it hasn't worked, I have tried going into the command prompt and tried to fix it by using the "BCDedit command" this hasn't worked, I have tried fixing the "BCD file" I have tried fixing the "Windows Registry" and I have tried fixing it by system restore but this will either give me an error saying I need to choose a system restore point not giving me the option to or it only shows me one point to where I can restore it to but I cannot select it as it says that "You need to enable system protection on this device" I am completely baffled as to what I can do at this point to even attempt to try to fix my pc, please help

:)

 

The Ultimate Realtek HD Audio Driver Mod for Windows 10

Hey Dj Urko, I am trying to install the realtek driver and I get the error 0x0001. I have disabled secure boot and Driver signature. I have the latest win 10 build. What am I doing wrong? Can u post the complete list of steps that I have to take? I have an asus z170 with alc1150.
Thanks in advance

 

Unable to boot the device with error: 0xc0000428 on Windows 10

Hi Vuk,

Thank you for posting in Microsoft Community and being part of Windows 10.

I understand the inconvenience you are facing in booting the device with 0xc0000428 error. We will help you with this issue.

Do let us know the following to assist you better with this issue:

• What is the make and model of your device?
• What is the complete error message along with the error code of this issue?
• From when are you facing this issue?
• Have you make any hardware/ software changes to your device prior to this issue?

I would like to inform that when you attempt to start a Windows 10 system, the system fails to start normally and you receive an error:
0xc0000428 for the signed driver dlkmdldr.sys. Do confirm us if you are facing the same issue.

Try the below and check if it helps.

Step 1: I suggest you to remove all the external devices except mouse and keyboard, hard reboot the device and check if the issue persists.

Step 2: I suggest you to boot the device by choosing the "Disable Driver Signature Enforcement" mode from the advanced boot menu, you would be able to boot the system to the desktop.

• Try to boot the device to Windows Recovery Environment
• Click on Advanced options, Startup Settings
  and Restart.
• Once the computer restarts, press F7 key to start he device on
  Disable Driver Signature Enforcement mode.
• Check if the computer boot successfully.

Step 3: I suggest you to install the pending updates on your device after restarting the computer.

Steps:

• Connect to the internet.
• Press Windows key and type
  updates.
• Click on Check for updates.
• Under Windows Updates, click on
  Check for updates.
• Try to install the updates being shown.

Hope it helps. Try the above an update us the status of this issue to assist you further accordingly.

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks