Windows 10: Borderless Windowed mode with controller plugged in stops USB ports.

Okay this is a weird one but here it goes. If I'm playing a game and I have a controller plugged in and switch the mode to borderless window and exit out of game, my USB ports will just stop working. I don't know what causes it but it happens. The games it happens on so far is Yakuza Kiwami and BloodStained.

When it does I get no sound indication when I plug in a flash drive, nor a disconnect sound. It will just not do anything. At first I though it was this but I was wrong.

https://support.microsoft.com/en-us/...t-a-usb-device

I did uninstall my 360 wireless receiver and controller and plugged in brand new ones to see if the old ones where the problem but it still happened later on. The HID Game controller driver will have a yellow triangle on it. This issue has happened to me 3 to 4 times so far and nothing I do works, if I try to disable it in device manager the manager will stop working. I also have to hard shut down my computer as if I try to shut it down, restart or sleep it will hang until I press down the power button.

Any help is appreciated

:)

 

Issue with USB ports turning off

Hi Mattx1,

Thank you for posting your question in the Microsoft Community.

1. Does the issue occur with all the USB devices plugged in to the PC?
   
2. Does the issue occur when you plug in the USB device to any of the UISB port on the PC?
   
3. Did you make any changes to the PC prior to this issue?
   

Let us try these steps one by one to check if that makes any difference.

Step 1: Suggest you to run the Hardware and Devices Troubleshooter and check if that helps.

1. From the Settings screen, choose Update & Security.
   
2. Select Troubleshoot. Look for Hardware and Devices Troubleshooter and run it.
   
3. Follow the on-screen direction to complete the process and if required please apply the fix it.
   
4. Once it is done, please reboot the computer and check the status.
   

Step 2: Suggest you to uninstall and reinstall the USB drivers on the PC to check if that helps.

1. Press ‘Windows + R’ keys, type ‘devmgmt.msc’ in run window and press Enter.
   
2. In Device Manager, expand "Universal Serial Bus Controllers".
   
3. Right click a device under "Universal Serial Bus Controllers" and click uninstall.
   
4. Perform same step for other devices. When completed, restart the computer.
   

All USB controllers will reinstall automatically.

Article for Reference.

Automatically diagnose and fix Windows USB problems:
https://support.microsoft.com/en-us/help/17614/automatically-diagnose-and-fix-windows-usb-problems

Hope this helps.

Let us know if you got the help you needed by clicking ‘Yes’ or ‘No’.

Regards,

Srimadhwa B

Microsoft Community-Moderator

 

Wireless Mouse stops working when external HDD plugged in to USB3 port


I have a minor but annoying problem and can't find a solution....

My wireless mouse stops working when an external USB3 HDD is plugged in to USB3 port. The mouse is about 3 feet away from the receiver.

My mouse is a Logitech M310.

• I don't have the problem if a USB 2 external HDD is connected to either a USB2 or USB3 port.
• I have moved the mouse receiver to different ports on both the front and back of the computer but this doesn't change anything.
• If I move the mouse very close to the receiver (a couple of inches), it works so it seems that the wireless range is reduced when the USB3 HDD is plugged in.
• If I connect a wired mouse, it works fine.
• I have 2 USB3 ports and the problem is the same on both.
• If the USB3 HDD is connected to a USB2 port, the mouse works normally.
• I changed the battery in the mouse but this didn't help.
• the USB3 HDD is a WD Passport that is self powered through the USB port.

Any suggestions?

 

USB 2.0 Ports Stopped working

Hello,

I recently noticed my USB 2.0 ports have stopped working, but my USB 3.0 port is functioning perfectly.

Steps i have tried:

- Restarting

- Searching for device changes in Device manager

- running troubleshooter

all these suggested fixes didn't remedy the issue, its a bit of an inconvenience that i only have one functioning USB port

Thanks