Windows 10: Wake from sleep issue

After the system goes to sleep once I awake it it hangs at the Windows screen (where time is shown left corner). After a bit I'm greeted with BSOD stating...


DPC WATCHDOG VIOLATION

This is a clean install of Windows 10 Pro 1909 18363.535. When I hit the power button (after the diagnostic runs to 100%) it shuts off then I'm able to restart the desktop without issue. All my drivers are current and SFC report no issue/s.



System specs:

Gigabyte GA-Z68XP-UD3 rev 1.0 (Award BIOS F10 latest)
Core i7 3770K

Asus RX 570 OC 4GB DDR5 (drivers 19.12.2)

32GB G-Skill DDR3 RAM (CL7-8-8-24) F3-1600C7D-16GTX 8192MBx4
Sound Blaster X-Fi Xtreme Gamer
LG Blue Ray DL
1TB Crucial MX500 SSD
1TB Mushkin RAW SSD
1TB Hitachi SATA3 7200rpm
1TB WD Black SATA3 7200rpm
Antec 650w PSU
Rosewill Mid Tower Challenger

Minidump file:

Dropbox - 121219-9125-01.dmp - Simplify your life

Ran: powercfg /devicequery wake_armed

Results:

Realtek PCIe GbE Family Controller
HID Keyboard Device
HID-Compliant mouse (001)
HID Compliant Device (005)
HID Compliant Device (007)
HID Compliant Device (008)

Ran: powercfg /lastwake

Results:
Wake History Count - 0

Ran: powercfg /A

Results:
The following sleep states are available on this system:
Standby (S3)
Hibernate
Hybrid Sleep
Fast Startup

The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.

Standby (S2)
The system firmware does not support this standby state.

Standby (S0 Low power idle)
The system firmware does not support this standby state.

Ran: powercfg /waketimers

Results:
Timer set by [SERVICE] \Device\HarddiskVolume4\Windows\System32\svchost.exe (SystemEventsBroker) expires at 4:58:28 PM on 12/26/2019
Reason: Windows will execute 'NT TASK\Microsoft\Windows\UpdateOrchestrator\Backup Scan' Scheduled task the requested waking the computer.

Timer set by [PROCESS] \Device\HarddiskVolume4\Windows\SystemApps\Microsoft.Windows.StartMenuExperienceHost_cw5n1h2xyewy\St artMenuExperienceHost.exe expires at 6:48:05 on 12/26/2019

:)

 

wake from sleep issue in windows 10

Hi,

Thank you for posting your reply. Apologize for the delay in response.

I suggest you to check which devices are configured to wake up the computer from sleep by following the steps below:

• Right click on Start icon and select Command Prompt (Admin).
• Type the command line below:

Powercfg /devicequery wake_armed

3. Check if the devices (Keyboard, Mouse, Ethernet cable) are listed.

If the system is not going to sleep and going to Hybernate, the only option to wake up is to press the Power button.

Hope the information is helpful.

 

Sleep / Wake Function, malfunctions after waking

Hi,

Issues that arise after waking up the PC from sleep mode might have been caused by a software conflict or system file corruption. For us to clarify the issue, we would like to ask these questions:

• What is the exact issue that you are experiencing?
• Did you notice any recent system changes prior to this issue?
• Have you encountered any error message?
• What troubleshooting steps have you done so far?

If you are having issues waking your PC from sleep, we suggest running the
Power troubleshooter as an initial troubleshooting. Kindly follow these steps:

• Click on Start.
• Type Troubleshoot, and then press Enter.
• Under Find and fix other problems, click on Power.
• Click on Run the troubleshooter button.
• Follow the onscreen guide.

We will wait for your response.

 

Sleep issues with Windows

Hi,

I understand the issue that you are currently facing, we will try the best we can to resolve your issue.

I suggest you to follow the steps below and check if that resolves the issue.

* Right-click on Start and Select Command Prompt (Admin)
from context Menu

* Type or Copy/Paste the below commands into it and hit Enter key

powercfg /devicequery wake_armed

• By executing this command, it will bring up all the device list that are configued to wake up your PC from sleep. Now it time to find the device which made you PC to come out of the sleep lastly. Go and execute second command
  now.

powercfg /lastwake

• 
  This will bring up the details of the device that made your PC to come out of the sleep lastly. Now go to the particular device properties and make changes accordingly to preventing that particular device to wake your PC from sleep.
  

Please get back to us with status so that we can assist you further.