Windows 10: Laptop trying to make network connection with computer

Both have Windows 10 Home Edition 1903.18362.535 64 bit on it.
the printer is HP Officejet 6600
The initial purpose was to share the printer HP Officejet 6600 (usb connected)that is set as shared on the computer and working, on the laptop I get the error : Windows cannot connect to the printer.Check the printer name. If it is a network printer make sure it is turned on and that the printer address is correct.


I checked all that.
I even tried all the methods mentioned in the tutorial, no one worked.
Since this failed I tried to make a network connection from the laptop to the computer with the result hereafter :
On the laptop : file and print resource (DESKTOP-L....) is online but isn’t responding to connection attempts. error code 0x80070035.
The remote computer isn’t responding to connections on port 445, possibly due to firewall or security settings, or because it might be temporarily unavailable.
Windows couldn’t find any problem with the firewall on your computer.
netbios over TCP/IP is enabled,
Network discovery is on, file and printer sharing as well and the printer is marked as shared.
I followed the tutorial option one and checked and eventally changed the settings accordingly on both desktop and laptop.

I can connect from (DESKTOP-L....) to the laptop (DESKTOP-U.....)
I ran netbscanner, same result : the computer sees the laptop, the laptop does not see the computer.


Since this going on for a while now, I hope someone can help me out, I cannot think of anything any more and followed all the recommendations I could find.
Thanks in advance.

:)

 

Connecting computer with no internet connection to network printer


@dk1971

1. Open Admin command and type: ipconfig
   
   
   
2. Win+X->Control Panel->Netwok and Sharing Center
   Follow the screen shot. This should disable internet access from this PC but allows access to local device(s)
   NOTE: Use the IP & Subnet Mask from step 1. Leave Default gateway & DNS Server blank
   
   
   

 

Losing network connection

Hello Dear, if you have a laptop or a PC with a wireless network adapter, you can see a list of available wireless networks and then connect to one of those networks. The wireless networks will only appear if your PC has a wireless network adapter installed, the adapter is turned on, and the wireless access point is in range.

1. Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.

2. In the left pane, under Network Tasks, click View available wireless networks.
In case, If you don't see the network you want to connect to, click Refresh network list. If you see the network but the signal is weak, move the PC closer to the wireless router.

3. Click the network you want to connect to, and then click Connect.

4. If you're connecting to a secure network, type the security key, and then click OK.

I Hope you solve out your query soon.

 

One computer cannot access other network computers.


So I've tried every troubleshooting step I know:

• Double checked that Net Bios was enabled
• Ran a bunch of network commands:
  • flushed DNS
  • registered dns
  • pinged and located the named computers successfully
• Reset my router to factory settings

Nothing works when I try to access via explorer. I'm still baffled by the fact that every other computer can access each other AND access this computer. It's just the outgoing connection from this machine that doesn't work.

Any thoughts?