Windows 10: Up Key stuck

Hi everyone,

So my Windows is acting out a bit and it registers the up key as always pressed, but only in the file explorer and the menus. Anywhere else it works fine, just in the menus of windows etc.

I've tried resetting Windows but that didn't fix the issue.

It usually kicks in after a few minutes of being booted.

submitted by /u/HolyUnixWasTaken
[link] [comments]

:)

 

Stuck in safe mode in windows 10

Safe mode is intended to help fix most, if not all problems within an operating system, it's not good if we got stuck on it. To correct this, we suggest that you follow the steps below to exit out of Safe mode:

• Open Run command by pressing Windows key + R
  keys on the keyboard and type msconfig in the command box and press
  Enter.
• Under General tab, put a check on Normal Startup option.
• Reboot the system and check if the changes are effective.

Let us know if you are able to exit out of Safe mode with these steps.

 

Stuck in Windows 10 Upgrade

My computer seems to be stuck in a Windows 10 failed upgrade loop. I was running fine on a beta version of Windows 10, and then I came downstairs one morning to see it repeatedly booting, attempting to repair, then rebooting. The steps I've taken to diagnose are:

• Attempting to boot off a USB drive (with all drives disabled in BIOS) - this fails at the point of the blue windows screen
  
• Attempting to boot the machine itself and getting into "repair/safe mode" using F7
  
• Looking at the BIOS for obvious failures (e.g. RAM that should be there is missing) - nothing obvious is wrong.
  

I am fairly certain the build version was 9926. For many months, the system would attempt to upgrade, and then say "it failed" for some reason and roll back.

Suggestions for next steps?

 

Taskbar bug: switching to another window -will not appear at the front


Follow either of these steps to fix the issue with the Active window hiding behind.

Method 1:
I suggest you to disable window by hovering over it with the mouse and check if it helps. To do so I suggest you to try the below given steps and check if it helps:

1. Press Windows key + X key and click on Control Panel.
2. Select or click Ease of Access.
3. Click or tap onEase of Access Centre.
4. Click on Make the Mouse Easier to Use was uncheck Activate Window by hovering over it with the mouse.
5. Check if issue is resolved.

Method 2:
I would suggest you to completely uninstall the touchpad driver and reinstall it. Kindly follow the below given steps.

1. Press “Windows key + X” and click on “Device Manager”.
2. In the list of devices, you should see the touchpad drivers.
3. Right click on the device and then select "Uninstall".
4. In the uninstall dialog, make sure you select the option to delete the driver package from the system. This causes the driver package installed earlier to be deleted.
5. In the Action menu of Device manager, select “Scan for Hardware changes” option. This will cause the device driver to be reinstalled. Once the driver is installed, close all windows and restart the computer.