Windows 10: Windows 7 upgrade to 10 error 0x8007001F - 0x3000D

Repeatedly getting this same error, and rollback to Windows 7. Any help most appreciated! SetupDiag, Disk Management, Minitool Partition Wizard files here. Log-collector gave an error--screencap attached.

No non-Microsoft antivirus installed.

One other wrinkle: my motherboard's network input is fried, so I am using a network-USB adapter for internet--the upshot being that I can't unplug *all* USB devices (except keyboard/mouse) during the download phase of the update. I did try unplugging it after the download, and got the same error as usual.







SetupDiag_21-Jan-2020.logSetupDiagResults.log

:)

 

Upgrade Windows 7 to 10 Error 0x8007001f



The partition layout of disk 0 (shown as disk 1 in Partition Manager) is non standard and was customized by the manufacturer. A normal Win 7 installation will have a layout:

1. 100MB System Reserved, NTFS format and marked as Active
2. C drive.

A normal Windows 10 installation will have:

1. 550MB Reserved partition, NTFS format and marked as Active
2. C drive.

Since you know how to use Minitool Partition Manager. Suggest to use it:

1. Create a bootable installation USB from the Windows ISO using: Rufus - Create bootable USB drives the easy way
2. Delete the 1st 2 partitions (102MB, 15GB) then create a 550MB partition, format as NTFS, label "System Reserved", assign a letter R, mark as Active
3. Move C drive next to the newly created 550MB. should look like the screen shot below, note H: drive should be C: in your case:
   
   
   
4. Boot up the USB created in step 1, on the first screen, press SHIFT+F10 to open the Admin command prompt then type:
   bcdboot C:\Windows /s R: /f BIOS =====> This will create the BCD to boot Windows and store in R: (550MB partition)
5. Reboot the PC then try to upgrade again

NOTE: It is advisable to create a backup image of the whole disk 0, just in case anything goes wrong then you can restore back before making any modification.
To create a backup image Use:
Macrium Reflect Free Edition x64
Macrium Reflect Free Edition x86

 

Upgrade Windows 7 to 10 Error 0x8007001f

Screenshots of partitions and sfc/scannow results.

 

Getting 0x8007001F-0x3000D error during MIGRATE_DATA Windows 10 Installation

Hi, I am wanting to upgrade my Windows 7 Home Premium to Windows 10. However the installation has crashed out 5 times and reverted to my Win 7

first i got the 0xC1900101-0x30018 error during SYSPREP - I seem to have resolved this by bringing all my drivers (including hidden ones) up to date

Then I am now getting 0x8007001F-0x3000D error during MIGRATE_DATA - this has occured four times.

So far I have

• uninstalled norton 360
• used MS config to shut down all non MS services and clean booted

Note I am preferring to do an in place upgrade as I have no desire to be reloading all my software including my kid's Roblox and Fortnight

Any help appreciated

**Original Title**

upgrade Win 7 to Win 10 Fails (5 attempts)