Windows 10: Getting Stop Code

Have tried the hard turn off of computer 3 times. Several times. Do not get a safe mode screen always a “preparing automatic repair”. Which spins for hours! Should i use F12. To reboot some other way? Or ? Thanks

:)

 

Stop Code VIDEO_TDR_FAILURE - atikmpag.sys

Thank you for your help.

• I used DDU to remove drivers
• I check the HP site for older drivers as you suggested but there are none for Win10. I downloaded Win8 driver but on install it reported it was not compatible
• I checked the AMD site and have used older driver 15.200.1062.1004 but still get same stop code error (if you need me to send the files please let me know)

Do you have any further suggestions please?

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it