Windows 10: In my event viewer

Discus and support In my event viewer in Windows 10 BSOD Crashes and Debugging to solve the problem; This is a laptop ASUS These events were about a few weeks old. Only recently i found some critical errors that is quite concerning to me In the... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by Alex_070, Feb 20, 2020.

  1. Alex_070 Win User

    In my event viewer


    This is a laptop ASUS


    These events were about a few weeks old. Only recently i found some critical errors that is quite concerning to me


    In the event viewer under systems.. there were a few errors and critical errors.


    These logs doesnt look normal.. And when i check for a dump file there was none. Also more i didnt see any bsod


    One more thing is that during the date 2020-01-22 1:06:48 PM. I was using VMware and the app was trying update and it froze on me so i press the power button until it rebooted

    Another thing is after the windows update i dont see these errors anymore.


    Log Name: System

    Source: Microsoft-Windows-Kernel-Power
    Date: 2020-01-22 1:06:48 PM
    Event ID: 41
    Task Category: 63

    Level: Critical

    Keywords: 70368744177664,2

    User: SYSTEM

    Computer: LAPTOP-K3N5L94B

    Description:

    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

    Event Xml:

    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

    <System>

    <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331c3b3a-2005-44c2-ac5e-77220c37d6b4}" />

    <EventID>41</EventID>

    <Version>6</Version>

    <Level>1</Level>

    <Task>63</Task>

    <Opcode>0</Opcode>

    <Keywords>0x8000400000000002</Keywords>

    <TimeCreated SystemTime="2020-01-22T18:06:48.343732500Z" />

    <EventRecordID>3427</EventRecordID>

    <Correlation />

    <Execution ProcessID="4" ThreadID="8" />

    <Channel>System</Channel>

    <Computer>LAPTOP-K3N5L94B</Computer>

    <Security UserID="S-1-5-18" />

    </System>

    <EventData>

    <Data Name="BugcheckCode">159</Data>

    <Data Name="BugcheckParameter1">0x3</Data>

    <Data Name="BugcheckParameter2">0xffff978b96662060</Data>

    <Data Name="BugcheckParameter3">0xffffab045362f7b0</Data>

    <Data Name="BugcheckParameter4">0xffff978bb1e979a0</Data>

    <Data Name="SleepInProgress">6</Data>

    <Data Name="PowerButtonTimestamp">0</Data>

    <Data Name="BootAppStatus">3221225473</Data>

    <Data Name="Checkpoint">16</Data>

    <Data Name="ConnectedStandbyInProgress">false</Data>

    <Data Name="SystemSleepTransitionsToOn">4</Data>

    <Data Name="CsEntryScenarioInstanceId">0</Data>

    <Data Name="BugcheckInfoFromEFI">false</Data>

    <Data Name="CheckpointStatus">0</Data>

    </EventData>

    </Event>




    Log Name: System

    Source: Microsoft-Windows-WER-SystemErrorReporting

    Date: 2020-01-22 1:07:12 PM

    Event ID: 1001

    Task Category: None

    Level: Error

    Keywords: Classic

    User: N/A

    Computer: LAPTOP-K3N5L94B

    Description:

    The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f 0x0000000000000003, 0xffff978b96662060, 0xffffab045362f7b0, 0xffff978bb1e979a0. A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 7405349c-b02a-4b68-b1f1-0c02bf032ac2.

    Event Xml:

    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

    <System>

    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />

    <EventID Qualifiers="16384">1001</EventID>

    <Version>0</Version>

    <Level>2</Level>

    <Task>0</Task>

    <Opcode>0</Opcode>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2020-01-22T18:07:12.405288700Z" />

    <EventRecordID>3497</EventRecordID>

    <Correlation />

    <Execution ProcessID="0" ThreadID="0" />

    <Channel>System</Channel>

    <Computer>LAPTOP-K3N5L94B</Computer>

    <Security />

    </System>

    <EventData>

    <Data Name="param1">0x0000009f 0x0000000000000003, 0xffff978b96662060, 0xffffab045362f7b0, 0xffff978bb1e979a0</Data>

    <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data>

    <Data Name="param3">7405349c-b02a-4b68-b1f1-0c02bf032ac2</Data>

    </EventData>

    </Event>


    Log Name: System

    Source: volmgr

    Date: 2020-01-22 1:06:48 PM

    Event ID: 161

    Task Category: None

    Level: Error

    Keywords: Classic

    User: N/A

    Computer: LAPTOP-K3N5L94B

    Description:

    Dump file creation failed due to error during dump creation.

    Event Xml:

    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

    <System>

    <Provider Name="volmgr" />

    <EventID Qualifiers="49156">161</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2020-01-22T18:06:48.117851800Z" />

    <EventRecordID>3424</EventRecordID>

    <Channel>System</Channel>

    <Computer>LAPTOP-K3N5L94B</Computer>

    <Security />

    </System>

    <EventData>

    <Data>\Device\HarddiskVolume3</Data>

    <Binary>000000000100000000000000A10004C043000200010000C000000000000000000000000000000000</Binary>

    </EventData>

    </Event>

    :)
     
    Alex_070, Feb 20, 2020
    #1
  2. Nikhar_K Win User

    Error in Event Viewer

    Hi,



    Thank you for writing to Microsoft Community Forums.



    As you have mentioned, you have performed a repair installation on the computer and you see Event 508, 510 and 533 in Event Viewer.



    I would like to inform that if you see any critical error in Event Viewer, please share the event logs with us to help you with the appropriate troubleshooting steps. Please follow the steps mentioned below to share the event logs:



    1. Press Windows + X from the keyboard, select
      Event Viewer.
    2. Expand Windows Logs from the left pane and select
      Applications.
    3. Click Filter Current Log from extreme right pane. Then in the new windows check the box beside
      Error and click OK.
    4. Now, look for a critical Error in the list and note down the message/information from the
      General Tab in the lower section.


    Please reply with the status of the issue, we will be glad to help you further.



    Regards,

    Nikhar Khare

    Microsoft Community - Moderator
     
    Nikhar_K, Feb 20, 2020
    #2
  3. nancy3243 Win User
    Event Viewer problem with latest Windows Build 1607

    After installing the new Windows build 1607, the Event Viewer stopped recording events under Diagnostic Performance. (Before 1607 I checked the files located under Windows.old dated 9/23/2016 and located this file which indeed did have a list of events
    recorded.)

    Since the initial 1607 download there have been two new builds automatically installed on my laptop.



    The last step in an automatic download is the RESTART. Prior to my rebooting, I checked the Diagnostic Performance and for sure, these had the list of events.



    Rebooting by me, causes the Diagnostic Performance errors to disappear.

    As suggested earlier I have run the SFC/DISM commands with no errors reported.

    Any Ideas?

    Nancy
     
    nancy3243, Feb 20, 2020
    #3
  4. Robfly Win User

    In my event viewer

    mmc could not create the snap-in in event viewer (Windows 10)

    I tried the KB but didn't work.

    I found this and it fixed my event viewer mmc error

    1. Open File Explorer on the device.
    2. Navigate to the following path: C:\ProgramData\Microsoft\Event Viewer\Views
    3. Backup the content of the folder. The next step deletes the custom views and you may want the backup to restore the views when Microsoft fixes the issues.
    4. Delete all View_X.xml files in the folder (it starts with View_0.xml and increments the number by 1 for each file).
    5. Start the Event Viewer after deleting the files.
    rob
     
    Robfly, Feb 20, 2020
    #4
Thema:

In my event viewer

Loading...
  1. In my event viewer - Similar Threads - event viewer

  2. Lots of DeviceSetupManager error in event viewer windows 11, new self built computer and...

    in Windows 10 Gaming
    Lots of DeviceSetupManager error in event viewer windows 11, new self built computer and...: I have recently built my own computer 4070 super, 15 14600kf, ddr4 3600mz, strix b760a d4 and i had issues making it work, but was able to make it work great with all features. Recently, i downloaded Red dead Redemption 2 for a fun time playing, but have had issues with my...
  3. Lots of DeviceSetupManager error in event viewer windows 11, new self built computer and...

    in Windows 10 Software and Apps
    Lots of DeviceSetupManager error in event viewer windows 11, new self built computer and...: I have recently built my own computer 4070 super, 15 14600kf, ddr4 3600mz, strix b760a d4 and i had issues making it work, but was able to make it work great with all features. Recently, i downloaded Red dead Redemption 2 for a fun time playing, but have had issues with my...
  4. How to fix Application Error in Event Viewer

    in Windows 10 Gaming
    How to fix Application Error in Event Viewer: Hi, I recently installed Wacom Cintiq 16 driver from Wacom website that latest one, up on restart my PC It appears on Event Viewer as Application Error that the application has an issue, last time this happens It froze my PC and had to forces shutdown, the froze were not just...
  5. How to fix Application Error in Event Viewer

    in Windows 10 Software and Apps
    How to fix Application Error in Event Viewer: Hi, I recently installed Wacom Cintiq 16 driver from Wacom website that latest one, up on restart my PC It appears on Event Viewer as Application Error that the application has an issue, last time this happens It froze my PC and had to forces shutdown, the froze were not just...
  6. How to fix Application Error in Event Viewer

    in Windows 10 BSOD Crashes and Debugging
    How to fix Application Error in Event Viewer: Hi, I recently installed Wacom Cintiq 16 driver from Wacom website that latest one, up on restart my PC It appears on Event Viewer as Application Error that the application has an issue, last time this happens It froze my PC and had to forces shutdown, the froze were not just...
  7. I keep getting Errors and warnings in my event viewer.

    in Windows 10 Gaming
    I keep getting Errors and warnings in my event viewer.: Can you please have a look at a screenshot for me? Its all gibberish to me. https://answers.microsoft.com/en-us/windows/forum/all/i-keep-getting-errors-and-warnings-in-my-event/b2be780b-19ac-4ce1-908a-9018444be6f5
  8. I keep getting Errors and warnings in my event viewer.

    in Windows 10 Software and Apps
    I keep getting Errors and warnings in my event viewer.: Can you please have a look at a screenshot for me? Its all gibberish to me. https://answers.microsoft.com/en-us/windows/forum/all/i-keep-getting-errors-and-warnings-in-my-event/b2be780b-19ac-4ce1-908a-9018444be6f5
  9. PC Suddenly Started Crashing when playing games, event viewer text included. need help...

    in Windows 10 Gaming
    PC Suddenly Started Crashing when playing games, event viewer text included. need help...: So i bough this computer in 2020 it had no problems relating to this issue at all it all started 2 weeks ago, when I play games or put it under stress for more than 10 mins it always turns off, sometimes even in idle, I have experienced 2 types until now:1. it turns off...
  10. PC Suddenly Started Crashing when playing games, event viewer text included. need help...

    in Windows 10 Software and Apps
    PC Suddenly Started Crashing when playing games, event viewer text included. need help...: So i bough this computer in 2020 it had no problems relating to this issue at all it all started 2 weeks ago, when I play games or put it under stress for more than 10 mins it always turns off, sometimes even in idle, I have experienced 2 types until now:1. it turns off...