Windows 10: How can I install ezcap USB Cassette Capture without a disc drive?

I just bought ezcap USB Cassette Capture without realizing that the installation software is on a disc. My MSI has no disc drive.

I've searched for a workaround and found nothing relevant.

I've installed Audacity, but I have no idea how to:

1. get my MSI to recognize the ezcap device, or

2. how to get Audacity to work with ezcap.

I have read other questions and answers here and elsewhere but none says what to do without a disc drive.

There must be a way. Can anyone help?

Thanks!

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Installing Windows 7 via USB flash drive!

Its weird tho cause I have no problem with installing from disc. I did change it back to boot from HDD. I really dont want to uninstall all my components, kinds defeats the purpose of installing from usb. it would take longer to disconnect and reconnect after install then it would to just install from dvd.

Do you think its beacuse the drive was formated in ntfs, thats the only step I did different from the OP. Well that and the bootsect /nt60 command before coping files.

heres they way I went, probly have to try it fat32

launch diskpart.exe)
select disk 1 (or your USB drive number, use list disk to get it)
clean
create partition primary
select partition=1
active
format fs=ntfs
assign
exit

Now that the drive is boot aware, we have to initialize its boot sector with the Windows boot manager (BOOTMGR), using the Bootsect.exe utility located in the boot directory of the Vista installation DVD. We have to tell the utility that our target drive is NTFS formatted:

bootsect.exe /nt60 f:

 

please insert a disc into the usb drive

Hi,

It seems that your USB is having an issue. We suggest running Check Disk to find and repair errors in the USB drive. To do so, please follow the steps below:

• Press Windows key + X and then select Command Prompt (Admin).
• Copy and paste chkdsk E: /f, then hit Enter.

Please use chkdsk E: command to check the integrity of your USB drive.

Note: Change "E:" to the USB drive letter you're using.

Let us know the result.