Windows 10: how clear/reset network credentials on a network computer for another network drive computer?

I am using WIN10. network hard computer NHD1 sees in the networks network hard computer NHD2 but upon the initial network computer credential log in I typed the wrong password and had checked to auto log. So I get the error can't access NHD 2. I know the NHD 2 is properly set up because NHD3 and NHD4 can access NHD2 opens, sees shared folders and access. Resetting NHD2 network credentials won't help because NHD1 is still set to auto log on with wrong password. I assume I have to clear the NHD1's stored network credential for NHD2 but I don't see where its stored for a reset log/in.

:)

 

Help needed with simple wired network

Step one- Connect all PC's to router, and then the router to the modem. PC's go to router by the ports labeled "1-4" on the back of the router. WAN port goes to router. Power up all network equipment, and then systems.
Step two- Power on the computer connected to port one. Go into router settings at 192.168.0.1 and configure internet, dyndns, firewall, etc.
Step three- Go to "network set up wizard" in windows. (Network places- network set up wizard). The rest is self explanatory.
Step four- right click on each drive and printer you want to share, and then configure sharing preferences. Should be easy enough.
Step five- right click my computer, and the select "map network drive". Using the network address for each piece of hardware you shared, assign network drive letters.

Congratulations, you have a fully operational network. Happy Gaming! *Toast :toast:

 

Help needed with simple wired network

Perfecto!!!! *Smile

 

network credentials

"Network Credentials" still pops on my other computer Gerardscave and Dadscave will not list Gerardscave in the network. Gerardscave will list Dadscave but cannot access it. They are cat 6 wired through the same router.