Windows 10: Windows Update Service, change Start-up type

I tried to update Windows 10 from version 1803 to 1909.

Error: Service registration is missing or corrupt

In Windows Update Service, properties, I tried to change Start-up type from manual to automatic, but it is gray and cannot be changed.

Servicename: wuauserv. Path: C:\WINDOWS\system32\svchost.exe -k netsvcs -p

State: in progress wordt uitgevoerd. I cannot stop this. Buttons Start, stop, cancel, resume all gray.

Other errors while trying to update:

The installatie failed in phase FIRST_BOOT with an error during SYSPREP_SPECIALIZE operation

It takes half a day to download and install the update, and then, after 60% I get the message that the update cannot be installed and everything is put back to version 1803. To avoid this process leading to nothing but frustration I had turned off "Download Updates automatically"; I turned it on and restarted the pc to see if the Service wuaserv would be responding, but everything is still gray and cannot be changed.

:)

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.

 

Vista Automatic Updating Error

Automatic Updates isn't currently running.

 

Vista Automatic Updating Error

Resolution Suggestion:

# To resolve this problem, make sure that BITS and the Automatic Updates service are started..

A simple solution but one that works in most circumstances!

1. Click Start, click Run, type services.msc, and then click OK.

2. In the list of services, right-click Automatic Updates, and then click Properties.

3. In the Startup type list, click Automatic, and then click Apply.

4. If Service status is set to Stopped, click Start, and then click OK.

5. Right-click Background Intelligent Transfer Service, and then click Properties.

6. In the Startup type list, click Manual, and then click Apply.

7. If Service status is set to Stopped, click Start, and then click OK.

http://www.updatexp.com/0x80070422.html- source *Smile hope that helps.