Windows 10: Laptop automatically shuts off

My laptop shuts off automatically and keyboard doesn't respond after restart. I need an external keyboard via USB to put my pin.

Below is the warning in event logger under systems:


1. The speed of processor 7 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.

2. The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID XXXX


Request for information on what might trigger these events please.

:)

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Vista Automatic Updating Error

Automatic Updates isn't currently running.

 

Vista Automatic Updating Error

Resolution Suggestion:

# To resolve this problem, make sure that BITS and the Automatic Updates service are started..

A simple solution but one that works in most circumstances!

1. Click Start, click Run, type services.msc, and then click OK.

2. In the list of services, right-click Automatic Updates, and then click Properties.

3. In the Startup type list, click Automatic, and then click Apply.

4. If Service status is set to Stopped, click Start, and then click OK.

5. Right-click Background Intelligent Transfer Service, and then click Properties.

6. In the Startup type list, click Manual, and then click Apply.

7. If Service status is set to Stopped, click Start, and then click OK.

http://www.updatexp.com/0x80070422.html- source *Smile hope that helps.