Windows 10: Different BSOD error codes after faulty bios update

Hi, I recently built my first computer and it worked great for a couple months until I foolishly updated the BIOS (hoping to fix some audio interface problems I was having) and started running into trouble. I now understand what a mistake this was, as it froze during the update for hours and I was left with no choice but to turn off the power.
At first I would get a BSOD very occasionally and I didn't think too much of it but now it's very frequent. Sometimes I'll get one or two in a row on boot up. I downloaded a driver management program (DriverEasy) and I updated all the drivers that it reported as out of date. Other than this I haven't felt confident trying any other fixes. Please help!

Here is the report file:

DESKTOP-SEB2QON-(2020-05-25_20-18-35).zip

Here are my computer specs:
Motherboard: Asus ROG Strix Z390-E
Memory: Ripjaws V series (2x8GB) F43600C16D; WD Blue 3D NAND 1TB Internal SSD
GPU: RTX 2060 SC Ultra
Processor: i7 9700
OS: Windows 10 Home
OS Version: 1909

Thanks for your time!

:)

 

BIOS error codes

So I have motherboard with installed small LED screen, which presents BIOS error codes.

Where can I find a list of those errors. And I don't mean beep codes, but the "number" codes.

Ex after installing sound card, the motherboard startup fails with the code 15.

Example picture of code is here.

 

BSOD during gaming, plethora of different error codes!

Hello and welcome to TenForums

The log files that you provided only show one crash dump file so there is not a lot of information to go on. Furthermore the bugcheck code is not one I have ever seen before!

The stack recorded in the dump includes some references to storage and the analysis suggests memory corruption and so with nothing else to go on I would suggest that you do a check on the hard disk and RAM. This maybe the same as you have already run but it would be good to see the results.

Try CHKDSK
using option 3
Then



Diagnostics Test [/i] HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Similarly with a memory test it would be good to post the results after you have run memtest86+ for a minimum of 8 passes

You indicated that many more crashes have occurred, however, they are not being recorded. Please make sure that your system is setup to record crash dump files: Configure Windows 10 to Create Minidump on BSOD

If the BSOD errors are all different it does tend to suggest a hardware problem. Sorry I can't be more helpful.

 

BSOD during gaming, plethora of different error codes!

Here you go, the HD tune scans, did memtest but after 1.5hrs only one pass had been finished so will leave it on tonight again for more passes.