Windows 10: New Win10 Install - hangs on blue Windows logo at startup

Discus and support New Win10 Install - hangs on blue Windows logo at startup in Windows 10 Support to solve the problem; I reinstalled Windows10 from scratch yesterday (this is the 5th time this year). It installed fine. But on a cold startup it will get stuck at the... Discussion in 'Windows 10 Support' started by pers0n, May 31, 2020.

  1. pers0n Win User

    New Win10 Install - hangs on blue Windows logo at startup


    I reinstalled Windows10 from scratch yesterday (this is the 5th time this year).

    It installed fine. But on a cold startup it will get stuck at the black screen with the Blue Windows logo and no spinner. This happens about 50% of the time. If I reset the computer sometimes I am lucky and it will go to that same screen but have a spinner and then I know it will boot into Windows properly.

    I've run scandisk on both drives, memory check, etc. Not sure what to do now, this is my last attempt with Windows 10. Win7 worked fine for 8 years on the first install.

    :)
     
    pers0n, May 31, 2020
    #1

  2. Installation Hangs at Blue Windows Logo, Error Code C1900101-20017


    The BIOS update suggestion posted above by @Jegler helped me, @guhanath. I was on version 1.10 and updated to 1.90. The steps I took after that were just doing the official Windows 10 upgrade procedure.

    Then the Windows 10 installation went without a hitch, and I'm no longer on Windows 7. I'm going to consider this solved, thank you @Jelger for the suggestion to update the BIOS!
     
    KingDecimator, May 31, 2020
    #2
  3. DickStone Win User
    Hangs At Blue Logo

    When attempting to install 1803, computer hang up at the Blue Logo screen upon restart. Must force shutdown. Upon restart, reverts back to 1709.

    Any ideas to help complete the install?
     
    DickStone, May 31, 2020
    #3
  4. LaChef128 Win User

    New Win10 Install - hangs on blue Windows logo at startup

    Windows 10 installation hangs on the blue logo. All usb peripherals turns off.

    So i built a new computer and it went pretty straight forward..

    Until i came to install windows 10 to the ssd.

    I made a previous bootable usb flash drive from MCT and i have used this before on other computers and they worked fine. But using it on my new custom built computer it would hang every time at the same place. No error messages, nothing.

    The components are all new.

    The strangest thing is, if i select advance setup (the screen which gives the options of safe mode, safe mode with networking etc) selecting the option of "Disable driver signature enforcement" would SOMETIMES allow me to get to the install screen.

    This has worked twice now but the problem is at times if Windows was to restart it would fail to boot up again! Hanging at blue logo!

    I have since tried to install it again after wiping the M.2 ssd ( there is an option to clear the data from my bios) and reinstall windows 10 but somehow the method i used previously is taking me back to the hanging blue logo.

    ImI really frustrated with this and really annoyed.

    Any suggestions or help is appreciated. But please, i cant log into windows so any suggestions to update drivers etc is pointless.
     
    LaChef128, May 31, 2020
    #4
Thema:

New Win10 Install - hangs on blue Windows logo at startup

Loading...
  1. New Win10 Install - hangs on blue Windows logo at startup - Similar Threads - Win10 Install hangs

  2. Windows 10 Installer usb hanging at logo.

    in Windows 10 Installation and Upgrade
    Windows 10 Installer usb hanging at logo.: New pc build, trying to do a clean install of windows 10. Created installer usb using the tool on MS website. USB was formatted GPT FAT32, 16gb capacity. Upon booting to bios menu the usb drive is seen - showing 2 partitions, one labelled UEFI, one not. Trying to boot to...
  3. Windows hangs on Boot logo

    in Windows 10 Installation and Upgrade
    Windows hangs on Boot logo: Hi, I have a FUJITSU SH760. Recently I decided to upgrade from WIN 7 to WIN 10. However, when I tried to do so, the PC restarts and then hangs at the Windows 10 boot logo. I did things multiple times twice from merely upgrading and 5 times on a clean install. I tried many...
  4. Blue screen at startup Win10?

    in Windows 10 Installation and Upgrade
    Blue screen at startup Win10?: First of all. I'm a computer scientist and I know this area. So please don't answer unless you really know something. We have a PC in our company that often simply shows a blue screen when starting up. NO BSOD. Simply a blue screen. But sometimes it also boots up normally...
  5. Erratic Complete Startup on New Win10 Install

    in Windows 10 Performance & Maintenance
    Erratic Complete Startup on New Win10 Install: My current win10 install on a Dell T3500 was becoming slow, with noticeable time needed to switch to an open Microsoft Word document after viewing Firefox, oddball activities with some app’s, etc. I decided to perform a win10 reinstall using the Media creation tool on a...
  6. WIndows 10 Clean Install Hangs at Blue Windows Logo

    in Windows 10 Installation and Upgrade
    WIndows 10 Clean Install Hangs at Blue Windows Logo: Hi. I would reply to one or more of the numerous existing discussions about this, but they've been locked. I ran into the same situation, and finally resolved it with a specific BIOS setting. I wanted to document that in a public location in case anyone else runs into the...
  7. Windows 10 installation hangs on the blue logo. All usb peripherals turns off.

    in Windows 10 Installation and Upgrade
    Windows 10 installation hangs on the blue logo. All usb peripherals turns off.: So i built a new computer and it went pretty straight forward.. Until i came to install windows 10 to the ssd. I made a previous bootable usb flash drive from MCT and i have used this before on other computers and they worked fine. But using it on my new custom built...
  8. startup logo hang after enabling windows feature hypervisor

    in Windows 10 Support
    startup logo hang after enabling windows feature hypervisor: Hi I need some help with this issue: I activated hyperV and isolatedusermode and now windows will not boot and hangs on startup logo. I was able to disable isolatedusermode but hyperv is still enabled. I have tried to dism /disable-feature hyperV and I get a 0x8000ffff...
  9. Installation Hangs at Blue Windows Logo, Error Code C1900101-20017

    in Windows 10 Installation and Upgrade
    Installation Hangs at Blue Windows Logo, Error Code C1900101-20017: So here's the lowdown: My PC used to run Windows 7 Ultimate (but it wasn't Genuine). To prevent any potential future problems with Windows 10 from Windows 7 Ultimate not being Genuine, I reverted back to Windows 7 Home Premium which I had my product key laying around for....
  10. Windows 10 Installation hangs on Windows logo

    in Windows 10 Installation and Upgrade
    Windows 10 Installation hangs on Windows logo: I made a bootable USB via rufus. Restarted my PC, went into Boot Options and Booted via my bootable USB, pressed a key to boot via USB and the Windows Logo appears and then nothing happens, stays like that forever. Click on the attachment and you can see the logo and...