Windows 10: how to factory reset windows 10 computer from command prompt?

My laptop crashed for no obvious reason about 2 days ago. I turned it on immediately after and Windows 10 was not able to start but it took me to the repair options. I've tried startup repair, uninstall updates, UEFI firmware settings, system restore, and system image recovery and none of them have worked for one reason or another. The only option that I seem to be able to access is command prompt. I already tried the systemreset command and it tells me "systemreset is not recognized as an internal or external command operable program or batch file". I'm at a loss for what to do now, I really only have junk on this computer that I can easily download later so resetting seems like the easiest option.

:)

 

How do you factory reset windows 10 with prompt codes

Hi

To know on how to do a factory reset on your computer, we suggest that you check and follow the steps in this
article on how to reset or reinstall Windows 10.

You can also try performing the suggestion shared by Jessen P and
Yowa N on this thread on how to use command prompt
on Windows 10 to factory reset my laptop.

Let us know if you need further assistance.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

command prompt will not open in safe mode with command prompt

Would I just follow the same steps within safe mode after hooking up to the other system?