Windows 10: Boot Issue

Hi,

I have a desktop computer with Windows 10. I remember dabbling in its bios for a game to run (virtualisation something) it didn’t solve the issue so I put the options back to default but now every time there’s a power cut, when I turn the PC on it gives me a bluescreen and I have to wait for like 10 mins then shut down, use a bootable flash and restart again, then it boots up normally.

Is there a way to fix that, or maybe reinstall Windows without formatting?

P.S. The turn off three times to access advanced options doesn’t work, it freezes in the bluescreen. Only a USB bootable flash drive will get the computer to boot up again.

submitted by /u/Linton170
[link] [comments]

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.