Windows 10: After reset the screen in front of the BIOS press what?

Should I enter the BIOS by pressing F12 or ESC? I have zero plan of this and just want to reset my PC completely!

:)

 

bios

Hi all i am new in this forum, i need meanings step by step of each item listed in the bios Phoenix-Award

 

Blank screen when entering BIOS, but Windows Boots fine on ASUS CH7

Hello,

I wanted to check the bios settings and I have suddenly found out, that when I press DEL to enter BIOS, the display is blank. Monitor is On, it has signal, but with blank black screen. Computer starts normally, beeps, displays the AMI initial screen and normally boots into Windows. If I press DEL however, instead of going to BIOS, I get blank screen.

Baseline:

• AMD Ryzen 2700X / ASUS Crosshair 7 WIFI
• BIOS 2008
• Windows 10 PRO 1809

Troubleshooting done:

• Monitor to any other display output (only this one is on, others are off)
• Different VGA
• BIOS reset - did not help, although it was reset. I got message that BIOS was reset, press F1 to enter bios, but then - the same issue.
• BIOS Flashback update - After pressing the button, it blinks 3 times, then turns on, which should be OK. BUt nothing is happening - the led on USB stick does not blink. Whan I interrupt, the PC works as before.
• EZ Update in Windows - after submitting to update the bios, it restarts, but then enters the BIOS, which is - blank. After restart, all works as before (with black BIOS)
• Entering BIOS from Windows (Shift-Restart) does have the same effect

I am out of ideas now - the PC works, just can't get into BIOS to change anything. Of course, now, I have the default settings loaded because of few BIOS resets.

Interesting is, that when in BIOS, I am getting 0d on the postcode - changes to this after entering the BIOS. In the manual, this value should be reserved for future AMI BIOS errors.

Any hints?

 

access BIOS settings in Win 10

I have an 8-year old computer running Win 10. I need to access the BIOS settings. It used to be the holding down the F2 key during startup would bring up the BIOS screen in Windows computers. But this no longer works. A web article listed a complicated
series of steps leading to a reboot . . . but still no access to BIOS. Any suggestions?