Windows 10: USB drive showing as Local Disk on Windows 10

Recently, when I plug any USB memory stick into my PC, it shows as a Local Disk rather than a USB Drive. This means that certain programmes do not recognise that I have a removable device plugged into the PC.

However, if I plug the memory sticks into my laptop, then they show as USB Drives.


How do I correct this so that USB memory stick are properly identified as USB Drives?

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

help. USB drive isn't assigned a drive letter.

Any usb flash drive I plug into my computer isn't assigned a drive letter. The physical drive shows in the "safely remove hardware" but it doesnt show up in disk management. I have tried to populate the volume thru the safely remove hardware properties window and it does pop up in the list but it doesn't stay there. This isn't a format or assign a letter problem. It's more complicated then that. Maybe one of the services needed for usb drive management was disabled? Suggestions needed. btw external usb harddrives work fine.

 

External hard drive is showing up as local disk drive

Hi,



Thank you for writing to Microsoft Community Forums.



As you have mentioned that the external hard drive is showing as local disk drive instead of a USB drive, it is because the file format for the external hard drive is same as the internal hard drive and that’s why it is showing
up as a local disk drive and not a USB drive.



Also, since you are facing issues while changing the drive letter of the drive, for further clarity on the issue and to guide you accordingly, respond to the questions listed below:

1. What is the make and model of the hard drive?
   
2. Were you able to save or create a file on the hard drive previously?
   
3. What happens when you try to copy and paste the data from the hard drive?
   
4. What was the result of check disk performed on the drive?
   

Since you are receiving the access denied error, I would suggest you to check if the user has appropriate permissions to read/write data on the external hard drive. Refer the article

"Access Denied" or other errors when you access or work with files and folders in Windows, refer the section
I cannot access, change, save, or delete files and folders.



Note:
The above article applies to Windows 10 also.



Please get back to us with the above information to assist you further with the issue.



We await your response.



Regards,

Prakhar Khare

Microsoft Community – Moderator