Windows 10: PC Issues after system reset, what to do?

Hello,


I just factory reset my PC. After doing so, I put new RAM DDR4 3200MHz 2x16GB into the PC, as well as a Samsung 970 EVO M.2 1TB NVMe SSD. I installed windows 10 to the SSD. However, now my PC freezes on the home screen occasionally after a few minutes, and seems to be unable to properly detect my GPU. Furthermore, the PC does not detect my second monitor. Here's a list of my specs:


CPU: AMD Ryzen 7 2700X


Motherboard: ASUS ROG Strix B450-F Gaming


GPU: RTX 2070 Ultra


Memory: G.SKILL TridentZ Neo DDR4 3200MHz 2x16GB


SSD 1: Samsung 970 EVO M.2 1TB NVMe


SSD 2: Samsung 850 Pro 256GB


HD: Toshiba 2TB 7200RPM


Power Supply: 700W 80+ Bronze


Any and all help will be appreciated, as I am at a loss with what to do with my PC

:)

 

wrong bios programmed on my card what now?

are you kidding? or is this being lost in language barriers?(if so, then id suggest trying google translateon the list above, or reading it several times, im sorry that i cant help with that part) the PCIe slot is what you need, thats where you plug the GPU into. follow the step by step guide, that is your solution. VGA= Video Graphics array, or adapter in this case, AKA GPU, Aka, Video Card.

The 2nd gpu acts as a way to boot into OS since you're not able to do so with the damaged GPU. I don't know what your system specs are but if you have onboard graphics enable them in your bios and then reset your PC or do it after a reset depending on what your motherboard requires that will allow you to boot into your operating system then follow the steps after number three in the list above.( note that if you do not have built-in graphics on your CPU this is where you will use a second GPU )

i hope this helps......Best of luck, i have 35minutes to get dressed, and be on a transport to Kessel.......another day covered in Spice, *Frown (atleast im working in the Refinery *Wink )

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Multiple Issues After Resetting Laptop

Hi,

I recently reset my laptop and since then I've been experiencing a whole host of issues:

• Windows search bar doesn't work
• Shop app won't open
• Won't allow me to change location settings
• Clock/calendar on my toolbar is unresponsive when I click on it

Any ideas what the problem might be, please? Advice / suggestions are very much appreciated!

Cheers,