Windows 10: Aspnet_compileter.exe always running

Why when i am playing games, the windows>net>framework>aspnet_compliter.exe always run and stop, run and stop, run and stop it makes me crazy. When start running, it open cmd and automaticly alt+tab my games, pleaseee helpp :

I have net framework v4.8

:)

 

R7 260X always runs at 2D Clock (300Mhz)

I've followed very carefully all your steps. But here is the result: *Frown



This is when I run the test from GPU Z. *Frown

 

R7 260X always runs at 2D Clock (300Mhz)

First you should do a fullscreen benchmark to see if the clocks will go up. (Any windowed benchmark is never a good test for that).
Like 3DMark 2013


I would suggest you again in CCC -> Performance -> Overdrive

• enable Overdrive,
• then move the power slider to the right, in order to allow it sufficient power.
• then -slightly- overclock the core using AMD's own Overdrive right there. 50 Mhz up should be enough.
• Click Apply.

Otherwise, I would suggest that you install the drivers you got with the card. (as they are older than 13.12 whql first completely clean from AMD drivers).

 

R7 260X always runs at 2D Clock (300Mhz)

After you disabled the IGP, you have to reinstall the Catalyst 13.12 driver set (but first clean your PC from the previous AMD drivers, see below).

Try disabling it in BIOS; it is better anyway for several reasons. The P8H61-M LE has an UEFI BIOS. If your BIOS is similar to the boards i know look for:

• Advanced Mode, ->
  System Agent Configuration
  • Initiate Graphic Adapter: PCIE
  • [...]
  • Initiate iGPU: Disabled

If you have successfully installed Catalyst 13.12 WHQL, you could navigate to C:\Users\*YOU*\AppData\Local\ATI\ACE and open the Profiles.xml. You could edit it with your xml editor or with Notepad++. (Note: that is not the standard Notepad!)
It contains the settings for the card. But don't do anything with it if you don't know what you're doing.

Again:

• after you have disabled the IGP, you should
• uninstall all previous ati/amd software (following these steps exactly)
• reinstall Catalyst 13.12 WHQL
• Your problem should be solved now.