Windows 10: Brother won't print

My Brother MFC-495CW won't print. It pops up in my queue for a second or two and then is just gone. I have uninstalled the printer numerous times. I read it may have something to do with a Windows update, but I am seriously struggling trying to figure this all out.

:)

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

Won't print

I have to say, I've seen a lot of posts on printing issues with Brother Printers over the past year. Are they not updating their drivers?

As for suggestions, none at this time *Sad

 

Brother printe Laser faded text

This is the Brother print quality troubleshooting guide for your printer: Online User's Guide

Follow the suggestions under the “faint” print topic. Light print is not a typical print problem requiring repair. Light print is usually a problem with your printer supplies, making it a consumables problem and not a printer hardware problem. Use a genuine brother toner cartridge and drum unit. Also check for the “toner save” feature that might be turned on.

If the light print continues, it is almost certainly the transfer roller that is causing the issue. However, it can be an electrical issue as well as an issue with the laser assembly.

Transfer rollers are usually a simple replacement but I don’t see a transfer roller available for this model of printer. Therefore, if using new, genuine supplies does not fix the problem the printer is not serviceable or is not worth the cost of repairing.