Windows 10: Booted in selective start-up with all Windows services off, can't get to desktop

Hello. I turned selective startup on and haphazardly disabled every service I could. My login screen requiring a pin does not work, and I cannot do anything but click the set up new pin button which doesn't do anything. I have tried resetting my PC, booting in safe mode, and returning to a restore point in the advanced startup but resetting stops halfway through and safe mode doesn't help me bypass the login screen.


I have screwed with command prompt a bit but I haven't made any progress, does anyone know a way to turn off selective start up or restart my services or login through command prompt? Thank you.

:)

 

Windows Powershell auto opens when booting up

Hi Victor,

To stop Windows Powershell to start whenever you boot up your laptop, we suggest you to follow the steps listed below for selecting the services you want to run at startup:

• Search System Configurationfrom the taskbar.
  
• Select the top result, System Configuration desktop app.
• Go to the Startup tab on the System Configuration main window.
• Uncheck the box next to Windows Powershell program.
• Click OK.
• Click Restart to restart your computer.

Let us know how it goes.

Regards.

 

confused about selecting boot device


This is good information but I am confused about step 2 below. Wouldn't I need to select whatever device, USB or DVD, the install media is on at this point and not how I want the final install to boot?
Thanks,and sorry for dragging up an old post but it had most of the info I was looking for.

It is up to you whether you want to install Windows using MBR or GPT and you need to set the option in the BIOS for MBR or GPT style installation.

Having said that. Here's the steps:

1. Disconnect all HD/SSD except the one you will be installing Windows
2. From the boot menu, Select #1 for GPT or select #2 for MBR to boot up the Windows Installation
   Attachment 29081
   NOTE: The screen is an example and might look different from yours
3. Once the Windows Installation started. On the first screen, Press and hold SHIFT Key + F10, a command Windows will popup then type:
   - diskpart
   - select disk 0
   - Clean
   - Exit
   - Exit
4. Click Next to continue.
5. Select Custom
6. Select the first unallocated partition and click next. Windows will create all needed partitions to install Windows 10
7. Follow all the rest of the instruction to complete.

MBR installation:

1. 500MB System Reserved partition
2. C: Drive

GPT installation:

1. 450MB recovery partition
2. 100MB EFI System Partition
3. 16MB MSR partition
4. C drive.

[/QUOTE]

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk