Windows 10: proceed and is it going to work the RAID 1 After reinstall finishes??
Discus and support proceed and is it going to work the RAID 1 After reinstall finishes?? in Windows 10 Installation and Upgrade to solve the problem; My PC is problematic -- ca not update OS -- and i decided reinstall Windows 10 Pro on C:/ nvme I have also 2x2TB HDD as one RAID 1 F:/ DISK for my... Discussion in 'Windows 10 Installation and Upgrade' started by LeonidasSavvides, Jul 12, 2020.
Thema:
proceed and is it going to work the RAID 1 After reinstall finishes??
Loading...
-
proceed and is it going to work the RAID 1 After reinstall finishes?? - Similar Threads - proceed going RAID
-
Reinstalling RAID 1 using NVMe drive
in Windows 10 Installation and UpgradeReinstalling RAID 1 using NVMe drive: Hi, I had 2 Corsair Force Series MP600 2 TB, NVMe PCIe Gen 4 x4 M.2 SSD in RAID 1 when I ordered my computer from Origin PC. One of the drives was bad so I switched from RAID 1 to AHCI and sent the bad drive for replacement. I have the replacement drive installed now and I am... -
Raid 1 drive not working in Win 10 x64 after PC upgrade
in Windows 10 Network and SharingRaid 1 drive not working in Win 10 x64 after PC upgrade: Raid 1 drive not working in Win 10 x64 after PC upgrade Hi all, I upgraded my CPU, Motherboard, memory, and SSD. Cloned the SSD so I didn't have to reinstall Win10x64 OS. Most things went smoothly, but it was surprising that my 2 HDDs in simple RAID1 configuration didn't... -
My raid 1 disapeared
in Windows 10 Drivers and HardwareMy raid 1 disapeared: Hello, I recently built my new gaming pc and i bought two hdd drives and not knowing what to do with them someone told me I should try doing a raid 1. I know it has its flaws and its strengths but I already know them. So I went to control panel --> system --> Space/disk... -
raid 1 troubleshooting
in Windows 10 Supportraid 1 troubleshooting: OK...I have been fighting a raid 1 for about 24 hours and am at my wits end here ! SOS!!! ;-) I have two identical Samsung 850 1 TB SSDs. I have tried setting up raid 1 in bios AND in Win10 with no luck. The BIOS got set up to the point that I got "functioning raid" message... -
Windows reinstall & Win RAID 1
in Windows 10 Ask InsiderWindows reinstall & Win RAID 1: Hello. First time poster to this sub. I have an SSD for a boot drive, and my data locations are on a Windows RAID 1 (made the array during the initial install about 18 months ago). This week I am planning on upgrading to a larger SSD on which I will reinstall Windows. My... -
Can't boot after deleting a raid 1 mirror.
in Windows 10 Network and SharingCan't boot after deleting a raid 1 mirror.: I deleted an old Intel WINDOWSXP raid 1 mirror and the system would not boot. I tried fixboot “access denied” . All hard drives removed. I used the procedure to use fixboot but the problem was not the same as indicated. My boot is volume 1 but as’”E”. Volume 3 is” C” which... -
Raid 1 problems
in Windows 10 Drivers and HardwareRaid 1 problems: I have two 3TB disks on Raid 1 setup. I also have a folders with DVD movies there. The problem is that my media players crashes after the "Universal" intro when i try to play them. If i test the discs separately it works fine. But on Raid 1, it crashes. Weird thing is that... -
Raid 1 problems
in Windows 10 SupportRaid 1 problems: I have two 3TB disks on Raid 1 setup. I also have a folders with DVD movies there. The problem is that my media players crashes after the "Universal" intro when i try to play them. If i test the discs separately it works fine. But on Raid 1, it crashes. Weird thing is that... -
Windows 10 raid 1 using windows raid
in Windows 10 Drivers and HardwareWindows 10 raid 1 using windows raid: Hello everyone. I'm new to the forum. I've added a hard drive to my system to enable raid 1 via windows 10 Pro (not hardware raid). my main drive has 4 partitions which were set up when I installed windows 8.1. I have since upgraded to 10 pro. I assume these partitions...