Windows 10: I have yellow and blue colors too bright ,] I have tried almost everything.

I have yellow and blue colors too bright ,] I have tried almost everything. any tips

:)

 

Touch pad not working. I have tried everything.

Hello.


I have a semi new Lenovo laptop ThinkPad T450s with a new hard drive. After installing Windows 10 the touch pad doesn't work. It did however work before. I have spent all day trying to read up on how I may solve this to no avail. Therefore I am writing my own help request. Here is a list of things I have tried;


Not Fn + F5
tried updating drives
not in device manager
not in control panel - mouse properties doesn't give me touch pad option (picture 2) nor is it anywhere in the control panel under deivices to be found
Activated in BIOS
I tried taking some steps I read online in the Registration Entries but files seemed to be missing (perhaps here is the problem) but only ended up making my USB mouse to stop working so that didn't do the trick.
Synaptic pointing device is under View and show hidden devices.
Not sure what to do about the yellow exclamation mark but it says error "This device is not present, is not working properly or does not have all its drivers installed. (Code 24)"
First picture.








Please help. Its driving me crazy. Thank you!

 

Windows 10, Now a lot of things have been turned to a bright yellow.

Windows 10, Now a lot of things have been turned to a bright yellow. I can not figure out what to change. The biggest thing is Microsoft Solitaire Collection. All the cards a very bright yellow. I have tried to change colors and color filters and have not
had any success. I have already done a settings reset to windows 10 and as well as a reset of MSC. I have not clue what else I can do. For an example, This box I am typing my question in, ALL the boxes across the top are all yellow. This is annoying as yellow
is the ugliest color in the world. Please help me fix this.

Thanks in advance for your help,

Dogg

PS. I do not know what category this should be in. I just picked the most generic.

 

Color Calibration of two Dell U2415 monitors - both too yellow?

I just received two Dell UltraSharp 24 U2415 monitors, which proudly boast "Award winning monitor with unbeatable color".

I am hooking these two up to a single laptop, an ASUS GL551K running Windows 10. One of them is via the provided Mini DisplayPort cable, the other through an HDMI cable to HDMI input on the monitor.

The problem is they both look bad. The whites are yellow, and as someone who stares at a sea of code all day, none of the colors look familiar.

They look fine on the laptop, nice bright whites, but both of the Dells are no good. I hooked it up to a Mac and it looks a lot better on that side.

To make a long story short, I have tried all of the following, and am unable to get a pure "white" color on either of these two monitors:

• Use in-monitor menu system to reset every option back to "factory defaults"
  
• Went into Color Calibration in Windows 10 and remove any pre-set profiles there, whether my own or Dell's
  
  • Ran monitor calibration, and it looks fine for gamma, contrast, and gray
    
  • Manually adjusted the RGB sliders to attempt to get a whiter white, but as close as I can get, it is not white. It looks like faded paper.
    

I highly doubt that I could get delivered two top-selling 24" monitors and both of them have a problem, so I'd just like to know how to adjust this. I went through other tutorials step-by-step, and so far, no luck.

I understand there are a whole host of "taking a photo of screens" when it comes to color calibration, but this is what I see ... close enough, anyway:





Thanks!