Windows 10: Windows 10 Powercfg Report---How to correct problems reported

I have ran a powercfg report the provided the below information. What error is most important to fix? How do you fix them? Are there any errors that don't have fixes?

Analysis Results Errors

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device NameUSB Composite Device
Host Controller IDPCI\VEN_8086&DEV_9D2F
Host Controller LocationPCI bus 0, device 20, function 0
Device IDUSB\VID_046D&PID_C52B
Port Path1
CPU Utilizationrocessor utilization is high
The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization.
Average Utilization %35.94
Platform Power Management CapabilitiesCI Express Active-State Power Management ASPM Disabled
PCI Express Active-State Power Management ASPM has been disabled due to a known incompatibility with the hardware in this computer.
Device Drivers:
Devices with missing or misconfigured drivers can increase power consumption.
Device NameCisco AnyConnect Secure Mobility Client Virtual Miniport Adapter for Windows x64
Device IDROOT\NET\0000
Device Status0x1802401
Device Problem Code0x16
Warnings
Platform Timer Resolutionlatform Timer Resolution
The default platform timer resolution is 15.6ms 15625000ns and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations.
Current Timer Resolution 100ns units10000
Maximum Timer Period 100ns units156250
Platform Timer Resolution:Outstanding Timer Request
A program or service has requested a timer resolution smaller than the platform maximum timer resolution.
Requested Period10000
Requesting Process ID19288
Requesting Process Path\Device\HarddiskVolume3\Program Files x86\Google\Chrome\Application\chrome.exe
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Namechrome.exe
PID6576
Average Utilization %7.89
ModuleAverage Module Utilization %
\Device\HarddiskVolume3\Program Files x86\Google\Chrome\Application\84.0.4147.105\chrome.dll6.53
0.85
\SystemRoot\system32\ntoskrnl.exe0.24

After this, I have 25 more of the same CPU errors. Should I worry about these?

:)

 

Incorrect System Report

Thank you for your suggestion.

I have run the Windows Memory Diagnostic and the report indicated that no memory problems were detected. Status remains the same - 2GB of RAM instead of 6GB.

I do not have any obvious performance issues on this system. I have another Windows 10 installation on a secondary laptop and the system specs are reported accurately on that installation.

 

Where's the Windows 10 compatibility report?

Hi,

Thank you for contacting Microsoft Community.

I understand that you are unable to get the compatibility report.

I will certainly help you with this.

Please provide the below information.

1. From which operating system you upgraded to Windows 10?

2. Did you check the desktop screen for the report?

I would suggest you to go through the below steps:

Steps: If you are unable to find the file on desktop, you can try to check in the system drive.

• 
  Press Windows key+E.
  
• 
  Double click on C: drive (default system drive).
  
• 
  On the top right corner in the search bar, type the compatibility file name and search
  

Please post back with the status of the issue and we will be glad to assist you further.

 

Windows problem reports not uploading

I'm running Windows 10 version 1803 with all available patches applied. I've been getting a lot of crashes over the last few months and it seems Windows isn't uploading these problem reports to Microsoft. All other reports are being sent but the ones for
Windows itself aren't going. I've followed the suggestions available on this forum, which is to verify the Windows Error Reporting Service is starting and reboot. I've done this a number of times but the reports still aren't going. I'd be grateful for any
suggestions, either to send the reports or to improve Windows' stability.