Windows 10: I have to unplug my power cord every time I want to use my comuter

So changed my comuter case and moved my components to it. But I've been having multiple problems since then, and the most annoying one is I have to unplug the power cord, wait a few second then reconnect it. I've made sure every components are installed correctly 3 times and I still have the same problem of not being able to restart my pc without unplugging its power.

:)

 

Unplugging power cord and holding the power button. PC won't turn on

Okay so I attempted to fix a Windows 10 usb problem by following a month old forum. The instructions were:

1. Unplug the power cord from desktop computer.
   
2. Hold in the on/off button for approx. 10 seconds until the light goes off. This kills the reserve power.
   
3. Unplug all of your USB cords from the back of your machine as well as any flash drive or any other USB
   device that is plugged into your computer.
   
4. Insert the power plug back into your computer and power it up. Allow it to completely load everything
   that it needs to before you do anything else.
   
5. Now start plugging your USB devices back into your computer one at a time while waiting for them to
   indicate that they are recognized. Do this with each one of your devices until all have been recognized.
   
6. Now right/click on computer or This PC and choose Manage / Device Manager /USB Serial Controllers and
   check to see if any of them have the yellow tag. They should not have if the problem is corrected.
   

Unfortunately I only got to Step 4, when I press the power button nothing turns on. So now I'm at a complete loss. The only thing that seems to turn on though, would be the lights to my led keyboard when I plug it in. Anyways, how do I fix/turn on my PC again?

Here's a link to the forum: Unknown USB device in Windows 10

 

Stuck in Reboot loop after power cut

Hi,

We understand your concern and appreciate the time and effort that you have invested in to fix the issue.

Before we proceed, I would like you to state which troubleshooting steps have you performed bedsides the mentioned to fix the issue.

As per the description, I suspect that you might be stuck in a reboot loop. I suggest that you perform Power Drain and check if it helps

• Unplug the charger and remove the battery of your laptop, if using a desktop remove the power cord.
• Press and hold the Power button for 30sec
• Plug the charger/power cord and restart system

Hope this helps

Regards

 

Laptop crashes when power cord is unplugged

Hello everyone! I recently bought MSI GF72VR and I am having strange problem with it.

Almost every time when I unplug power cord and I have open program my laptop freezes for about 3-4 seconds then it comes black screen and then blue screen and restart. I have tried to disable Microsoft AC adapter and I played a lot with Power options but
there was no effect at all.