Windows 10: Router Encryption Error

I router was working fine and suddenly it started making problem. I tried updating and manually installation of my Interl Wireless AC. Suprisingly there is no problem with my usb dongle.


It supports 160Mz channel and CRF module. Intel model 9560NGW. Router Information


TP Link Archer C20 2 montsm Old


Error pops up WiFi is not secured. Network error after I switched my modem. Device status says everything is working well and fine.

:)

 

Device Encryption not avaiable

Hello Fraczek,

Thank you for contacting Microsoft Community.

We understand your concern in this regard.

• Are you referring to BitLocker Drive Encryption?
• What preventing you from doing this?
• Did you get any error message or code while doing this?

Before you come up with the above information, suggest you to refer the article

Help protect your files using BitLocker Drive Encryption and see if it help you.

Do refer the article
Windows BitLocker Drive Encryption Step-by-Step Guide and check if it help you with the required information.

Keep us posted if you require further assistance.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

wireless conection to router

Hi,

To better assist you, we would like to know the following information:

• Are you able to see the router's name in the wireless networks list?
• Are you able to connect to the router but unable to connect to the Internet?
• Do you receive any error message when connecting to the router? If yes, what is the exact error message that you receive?

In the meantime, we suggest that you run the Network troubleshooter. The Network troubleshooter can help diagnose and fix common connection problems. Kindly follow the steps below:

• In the search box on the taskbar, type Network troubleshooter, and then select
  Identify and repair network problems from the list of results.
• Follow the steps in the troubleshooter and see if that fixes the problem.

If the issue persists, kindly try the troubleshooting steps on the following link:

Fix network connection issues in Windows 10.

We recommend that you try the steps on the Update the network adapter driver,
Run the Network troubleshooter followed by networking commands,
Temporarily turn off firewalls and Use network reset to reinstall network devices sections.

Let us know how it goes for us to assist you further.