Windows 10: Question on my New Volume drive????

Am I able to install games on the new volume drive, my pc has 223gb of storage but it is full so I checked and it shows another drive called new value it has 935 gb of storage. Am I able to use it as more storage?

:)

 

Unable to create simple volume on new 1TB hard drive

Just got a brand new HP computer with windows 10 Pro (64bit) preinstalled on an SSD. I am now adding a 1TB sata hard drive for storing data files. New HDD is installed as Disk 1 and is seen by Windows 10. I initialized it as an MBR basic disc. When I try to go to the next step of creating a volume, I right click on disk 1 and there is no option available to create a new simple volume. There are other volume options (mirror, raid, etc) but they are all greyed out. Simple is not even listed as an option. I went to DISKPART and using clean command, took it back to the start, then initialized it as a GBT. That didn't make a difference. Now I'm back to MBR again. I also did a List Volume command under DISKPART and confirmed there is no volume on this drive. I'm stuck. How can I get this drive to the point where I can format it and use it?
Thanks!

 

Reinstall Windows 10 to new hard drive

Hi Rodolpho,

We want to know about the issue you're having with your recovery drive. Please answer the questions below:

• Are you trying to reinstall Windows 8 or Windows 10?
• If you already upgraded to Windows 10, were you able to create a new copy of the recovery drive?

We suggest creating a new copy of the recovery drive and then follow the steps provided by Andre Da Costa above this thread.

Update us with the outcome so we can assist you further.

 

How to Partiton a Hard Drive in Vista

This is a way to get Vista to see another hard drive that is not associated with the OS. There is some times when your new hdd doesn't seem to want to work well with Vista. But, there is a solution in it.

Open the Computer Management By doing these steps.

• Click on the Start Button
• Click on Control Panel
• Click Administrative Tools
• Double click on Computer Management

You are now in the Navigation panel of the Computer Management.
When in Computer Management, you then have to allow the new drive to be recognized.

• Double click on Storage
• Double click on Disk Management

Now in the middle of your screen there is the layout of the Disk Drives that you have. The drives that are partitioned will show by the drive lettering. The others will just show up as having nothing at all in them. Below that there will be the Disk drives that are installed into the computer. You'll see that the primary one will all ways read as "Disk 0". Then you will have Disk 1 and so on. Under the Disks there will also see your CD-Rom drives.. If there is more then one, it will be labeled the same as Disk drives..

On to the Partitioning of the drive in question.

• Right Click on the drive
• Click to format the drive or Enable Volume. There will be a series of windows that open up. This is Vista's formatting. Just go threw the windows, and make sure everything is the way you want it to happen.
• Once the formatting is done, will take some time depending on the drive size.
• Right click on the drive
• Click on Mark the Partition as Active

After you have done those steps, The drive will be up and running threw Vista.



:Side Notes:
If you are not the Administer to the Os, then you will have to enable it..
You may also want to redo the drive lettering of it all. But, I really don't see a reason to do so. If you do, you have to redo drive paths and so forth.. A lot of work on something so small...