Windows 10: i need a product jey

i need a product key for windows 10

:)

 

Product ID

Hi Russell,

We appreciate the information you've provided regarding the product ID. To resolve your concern, we suggest that you do the following steps:

• Click on Start and type: Command Prompt.
• Right click on it and select Run as administrator.
• Type: wmic path SoftwareLicensingService get OA3xOriginalProductKey.
• Press Enter. That should give you the product key to type in the activation.

Get back to us if you need further assistance.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Windows Crashed?

Hi Jei,

I suggest you to Create a Windows 10 installation media and perform a Startup Repair on the device and check if it helps to resolve the issue.
This is an alternate way to boot the device and run recovery tools when something goes wrong with the Operating system.

Please follow the steps below to do Startup repair:

Steps:-

• • • • • 
          Insert the installation USB drive
          and boot Windows 10 from it.
          
          If you don't have one, you can Create an installation Media.
          
        • 
          In the ‘Windows setup’ page select the ‘language to install’, ‘Time and currency format’
          and the ‘keyboard or input method’ and click on ‘next’.
          
        • 
          Click on ‘Repair your computer’ and select ‘Troubleshoot’.
          
        • 
          Click on ‘Advanced options’ and select ‘Startup Repair’
          and select the operating system.
          

Do let us know if you are able to boot to desktop. Thank you