Windows 10: My hard drive isn't showing up in disk managment.

So recently I have built a new pc and I have one Samsung SSD 120 GB, but I have also installed another 1TB hard drive through the SATA ports. However the hard drive would show up in my bios page and in the device manager under disk drives, but when I open up disk management I only see the Samsung SSD 120 GB. I've tried updating the driver, uninstalling it, and updating windows as well. I've switch the sata ports it was plugged into and even tried windows memory diagnostics, but I still haven't been able to so the hard drive.


If anyone knows the problem, please help!!

:)

 

Hard drive shows up in device manager but no in disk management

I could not found my hard drive list disk, only my working ones. I tried following the steps anyway and nothing changed.

 

help. USB drive isn't assigned a drive letter.

Any usb flash drive I plug into my computer isn't assigned a drive letter. The physical drive shows in the "safely remove hardware" but it doesnt show up in disk management. I have tried to populate the volume thru the safely remove hardware properties window and it does pop up in the list but it doesn't stay there. This isn't a format or assign a letter problem. It's more complicated then that. Maybe one of the services needed for usb drive management was disabled? Suggestions needed. btw external usb harddrives work fine.

 

How to Partiton a Hard Drive in Vista

This is a way to get Vista to see another hard drive that is not associated with the OS. There is some times when your new hdd doesn't seem to want to work well with Vista. But, there is a solution in it.

Open the Computer Management By doing these steps.

• Click on the Start Button
• Click on Control Panel
• Click Administrative Tools
• Double click on Computer Management

You are now in the Navigation panel of the Computer Management.
When in Computer Management, you then have to allow the new drive to be recognized.

• Double click on Storage
• Double click on Disk Management

Now in the middle of your screen there is the layout of the Disk Drives that you have. The drives that are partitioned will show by the drive lettering. The others will just show up as having nothing at all in them. Below that there will be the Disk drives that are installed into the computer. You'll see that the primary one will all ways read as "Disk 0". Then you will have Disk 1 and so on. Under the Disks there will also see your CD-Rom drives.. If there is more then one, it will be labeled the same as Disk drives..

On to the Partitioning of the drive in question.

• Right Click on the drive
• Click to format the drive or Enable Volume. There will be a series of windows that open up. This is Vista's formatting. Just go threw the windows, and make sure everything is the way you want it to happen.
• Once the formatting is done, will take some time depending on the drive size.
• Right click on the drive
• Click on Mark the Partition as Active

After you have done those steps, The drive will be up and running threw Vista.



:Side Notes:
If you are not the Administer to the Os, then you will have to enable it..
You may also want to redo the drive lettering of it all. But, I really don't see a reason to do so. If you do, you have to redo drive paths and so forth.. A lot of work on something so small...