Windows 10: Issue with Teredo tunneling adapter

I have spent countless hours trying fix this issue in order to use Xbox Live multiplayer services but have had no luck. I genuinely don't think there is a solution and this is my last chance of solving it. In the Xbox Networking tab my NAT type will say 'moderate', but other times it says 'teredo is unable to qualify', but regardless of that my server connectivity will say 'blocked'. If I type 'netsh interface teredo show state' in CMD it will show my network as 'unmanaged' and my NAT as 'restricted port' regardless of all solutions i've tried. I would like to point out that a different PC using the same internet has no issues with this whatsoever, so we can rule out the router as the issue. Teredo tunneling adapter does not show up in device manager and it is simply gone from the list of legacy hardware. I've gone through the necessary steps in CMD to ensure that teredo is in fact installed and enabled as well. Another thing to consider is that when modifying teredo settings through gpedit.msc, the changes that make don't actually change anything. For example, after setting my client to enterprise and setting the refresh rate to 30 seconds, nothing changed even after a restart. I have tried port forwarding 3544 with udp protocol but I am unsure as to whether it is doing anything because it clearly didn't fix the issue. If you have any questions for me to rule out possible solutions then please ask and I will oblige.

:)

 

Microsoft Teredo Tunneling Adapter not Found

Hi,

It started off from teredo unable to qualify for Xbox connection.

Then, I tried following tons of suggestions through showing hidden drivers in Device manager, changing DisabledComponents value to 0.

However, I still cannot find Microsoft Teredo Tunneling Adapter.

I tried to install it by adding legacy hardware with all ways, but there was no Microsoft Teredo Tunneling Adapter in the list of the Microsoft Network Adapter .

 

I cant Find The Teredo Tunneling Adapter anywhere

Follow the instructions:

Step By Step Guide To Install Microsoft Teredo Tunnel Adapter

https://appuals.com/microsoft-teredo-tunneling-...

 

Missing Microsoft Teredo Tunneling Adapter from Legacy Hardware

Hello,

Please try these suggestions:

Method 1:

Step 1: Modify TCPIPv6 Parameters through Windows Registry

1. Press “Windows” + “R” keys to load the Run dialog box.Type “regedit” and press Enter.
2. Inside Windows Registry, navigate (from the left pane) and highlight this key.
3. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
4. At the right pane, double-click to modify the DisabledComponents key.
5. Set the DisabledComponents Value data to 0 (Zero) and select OK.
6. Close Registry Editor.
7. Restart your computer.
8. Navigate to device management.
9. Check if the Teredo tunneling adapter exists and working in device manager. To do that:

• From the View menu choose Show hidden devices.
• If the device manager's screen doesn't show any errors (and is without an exclamation mark) next to MS Teredo Tunneling Adapter then your problem is solved and the Teredo tunneling should work without problems.

If you face a screen with a yellow exclamation mark next to Microsoft Teredo Tunneling adapter.

Step 2: Uninstall all Teredo Tunneling Adapters & Interfaces.

1. Right-Click and Uninstall the Teredo Tunneling Pseudo-Interface.
2. Uninstall also all Microsoft Teredo Tunneling Adapters (e.g. Microsoft Teredo Tunneling Adapter #2 or #3 or #4, etc.)
3. Re-install Microsoft Teredo Tunneling Adapter by following the steps from this tutorial: How to install Microsoft Teredo Tunneling Adapter
4. If after re-installing teredo tunneling, you still have problems then proceed to Step 3.

Step 3. Enable Teredo Client using NETSH command

1. Right click at Command Prompt and select Run as Administrator.
2. At command prompt window type the following commands in this order and press Enter after typing each one of them.

netsh

int teredo

set state disabled

int ipv6

set teredo client

3. Close command prompt.

4. Open Device manager.

5. Select View > Show Hidden Devices. The Teredo Tunneling Pseudo Interface reappears and should be working without problems now.

Method 2 (not work in Windows 10 Home):

Open Group Policy Editor by running gpedit.msc command. Under Computer Configuration in the tree view, expand Administrative Templates then click All Settings. Look for "Set Teredo State", then double-click that. You will then enable the
policy and set the state below to "Enterprise Client" from what it was before in the dropdown menu under "Select from the following states".

Hope this helps!

References:

1. https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/how-to-install-teredo-tunneling-pseudo-interface/62790531-c342-4c5b-b367-542784ae768f

2. Teredo Tunneling Adapter Is Missing