Windows 10: NMI_Hardware_Failure stop error

We have a Dell Vostro 430 that is crashing several times a month. NMI_Hardware_Failure. I did a chat session with a Windows Independent Advisor who directed me to this site. I have done a mini-dump, and have zipped it into a smaller file. I have uploaded both the zip file as well as the original file to my onedrive folder. Here is the link to the files:



https://1drv.ms/u/s!AhsrN28LDAeKtHptl3k1t9t6MBX0?e=0hcZu6


What do I do next?


Thanks,


D

:)

 

nmi_hardware_failure and video_tdr_failure (nvlddmkm.sys) errors windows 10

Hello,

Thank you for posting your question on Microsoft community.

I appreciate you for providing details about the issue.

Please provide more information to help you better:

• 
  What is the make and mode of the computer?
  
• 
  Have you made any changes to the PC prior to the issue?
  

The NMI_HARDWARE_FAILURE bug check has a value of
0x00000080. This issue may occur due to hardware component malfunction or due to damaged or incompatible drivers installed in Windows. This bug check indicates that a hardware malfunction has occurred.

A variety of hardware malfunctions can cause the NMI_HARDWARE_FAILURE
bug check. The exact cause is difficult to determine.

I suggest you to refer the following article and check if it helps.

Refer:

Bug Check 0x80: NMI_HARDWARE_FAILURE

Bug Check 0x80 NMI_HARDWARE_FAILURE - Windows drivers

Additional Information:

NMI_HARDWARE_FAILURE error - Windows Client

(Also holds good for Windows 10)

Note: Restoring your PC to an earlier point will remove updates and drivers installed after the restore point was made. It won’t affect your personal files.





TDR is theTimeout, Detection, and Recovery
component in Windows.What happens is the Graphics Display driver for the installed graphics card stops responding. When this happens, windows will stop and restart the driver to fix the problem.

The most common reason for this issue is that the graphics device is being overloaded or used beyond its capabilities.

This happens most often when playing graphic intensive games, but can happen with any process that uses a large amount of graphic resources, such as when editing or creating videos.

Refer to the below link and try the troubleshooting methods. Check if that helps:

https://msdn.microsoft.com/en-us/library/windows/hardware/ff557263(v=vs.85).aspx



I also suggest you to uninstall and reinstall video card drivers from the manufacturer's website.

• 
  Right Click on Start, Select Device Manager.
  
• 
  Find and double-click the category of device whose driver you wish to uninstall (for example, the graphics card would be listed under Display Adapters).
  
• 
  Right-click the device, and click Uninstall.
  
• 
  Windows will prompt you to confirm the device’s removal. Click
  OK to remove the driver.
  
• 
  After the uninstallation is complete, reboot your computer as soon as possible
  

Hope the above information helps. Reply with necessary information and the result to help you further. Thank you.

 

Error: No work available to process

Hmm. Either it's put out errors and WCG is limiting the work units available, or the project list may not be set to supply other WU when one runs out. (if the problem lies here and not on your end)

On the options to your left, if you go into Results Status, select the computer from Device Name and then look through results see if either they were returned late, errors or any other kind of issue that would stop the servers supplying WU from that perspective.

If there are no errors then it's maybe down to your project list. So selecting Device Manager from the left menu and then clicking on the profile assigned to that computer and make sure that it's assigned to receive WU for other projects if they run out.

At least those steps will rule out problems from the WCG end.

 

Network PC Win10 1903 issue Error Code 0x80070035

i followed these steps, but no matter what, i couldnt stop network list services.

"windows could not stop the network list service on local computer. error 1061: the service cannot accept control messages at this time".

also, which pc am i meant to be running this fix on? both PC's reported error 1061.