Windows 10: I am getting an error with my disk

how to fix hard disk not showing automatically in windows 10 and showing up in disk manager telling to format and create a partition each time i boot on


Every time I boot I go into disk manager and see it always say me to create mbr or got partition each and every time

And each time i create a partition and check disk via cmd it says no error with disk then why is this happening

:)

 

Getting Disk Read Error

"A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart "

Thats the error I get, it occured once in a while but recently started to occur frequently. Not sure if its the Hard Disk that is failing. I ran chkdsk, WD disk checking utilities and HD Tach disk speed checking and all seems to be fine. If this error occurs I have to shut down the machine, turn off power and then turn it back on. Will once again start to work fine.

Here is hardware

Mobo: Gigabyte 740G version 1.0
CPU: X2 BE2400
RAM: 2 x 2GB DDR2 800 Crucial Ballistix
HDD: WD Blue 160GB SATA 8MB cache
Video card: Power Color 2600XT
PSU: Antec Earthwatts 380W
OS: W7 Prof 64bit.

Changed SATA ports, seem to work fine but suddenly I get this error. Thought ram is crapping out at that speed, so set the ram at DDR2 667 and voltage at 1.9V.

CPU is slightly overclocked to 2.5Ghz from 2.3 and at 1.2v. The board and cpu has been working fine in my 2K3 server for almost a yr 24/7 and before that crunching 24/7 for BOINC for about 6 months.

Only thing changed is the RAM. Earlier it had a regular crucial DDR2 667 2 x 2gb ram.

Haven't updated the bios, its still in default bios that came with the board, never had a issue so didn't have a need.

My suspect is Ballistix ram.

Or is the board or CPU slowly dying? HDD is about 1 yr old, used sparingly before, but now used for OS about 3 months now.

I don't have a spare SATA drive to test it, have to go buy one.

So just want few suggestions/troubleshooting tips.

*Toast :toast:

 

HARD DISK DRIVE ERROR

Hi Aditya,

In order for us to help you with your concern about hard disk drive error, kindly answer the following questions first:

• What specific error are you getting? Are you getting an alpha-numeric error codes such as 0x80070057? If possible, kindly post here a screen shot of the actual error.
  
• What troubleshooting steps have you tried so far?
• For initial troubleshooting steps, kindly access this
  support link.

We look forward to your response.

Regards.

 

Disk management console view is not up-to-date

i dont know how to fix your disk management, but i can fix your partition problems...




open up Command Prompt with admin rights. (Right click, run as admin)


enter in
DISKPART
list disk

then find the Disk number for your Raid array... lets call it number 7 ( you can tell what disk is what by the total size)
type in

Select Disk 7
List Partition (will give you a list of all the partitions..)
Select Partition 1 (im assuming you only have 1 partition on Disk 7) repeat this step if you have more partitions.
ASSIGN


that should get the array up and running ready to use.


EDITED.

any problems, post back ^^


Still EDITING *Stick Out Tongue

side question, have you tried restarting the PC?