Windows 10: Can't start the Sandbox / Container Manager Services

Discus and support Can't start the Sandbox / Container Manager Services in Windows 10 BSOD Crashes and Debugging to solve the problem; Hello, I can't launch the Windows sandbox. I get an error 0x800706d9 "There is no more endpoints available from the endpoint mapper". I understand... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by Cyber Sinh, Oct 22, 2020.

  1. Can't start the Sandbox / Container Manager Services


    Hello,

    I can't launch the Windows sandbox. I get an error 0x800706d9 "There is no more endpoints available from the endpoint mapper".

    I understand that to work the sandbox needs the "Container Manager Services" service to run. However, it refuses to start. When I try to start it, I get error 1053 "The service did not respond to the start or control request in a timely fashion". This error occurs immediately after the start request and does not seem to be related to any timeout.

    I specify that I have installed the last update of Windows10, October 2020 French.

    I confess that I don't know what to do anymore to launch this sandbox. Any help will be appreciated.

    Thank you in advance.


    Regards,

    :)
     
    Cyber Sinh, Oct 22, 2020
    #1

  2. error ox800706d9 sandbox not work

    For Windows 10 1903 sandbox wont start errors all you do is just restart the following service under Administrative tools

    Container Manager Services.



    then reopen sandbox should start up like normal.

    If it does not start up do the following below.

    If you have Hyper-V installed and Virtual disk is turned on under Administrative tools you must restart all these services

    1. Container Manager Services
    2. HV Host
    3. Virtual Disk
    4. Hyper-V Virtual Machine Manager
    5. Hyper-V Host Compute Service
    6. Network Virtualization Service
    [*]Do this in the following order

    1. Right click over (Network Virtualization Service) click restart and wait.
    2. Right click over (Virtual Disk) click restart and wait.
    3. Right click over (Hyper-V Virtual Machine Manager) click restart and wait
    4. Right click over (Hyper-V Host Compute Service) click restart and wait
    5. Right click over (Container Manager Services) click restart and wait

    Check these services are still on

    Application Guard Container Service (If installed)

    Remote Procedure Call (RDC) (""This must be running as most of the others rely upon its function it should never be disabled"")

    Once they are checked start sandbox and it should open up if it does restart your computer to ensure the services are still functional are a restart of computer this should also be done if sandbox does not start up once these services are restarted
    and checked.

    Created By Eric O'Malley

    17th June 2019
     
    viennafiji, Oct 22, 2020
    #2
  3. error ox800706d9 sandbox not work

    For Windows 10 1903 sandbox wont start errors all you do is just restart the following service under Administrative tools

    Container Manager Services.



    then reopen sandbox should start up like normal.

    If it does not start up do the following below.

    If you have Hyper-V installed and Virtual disk is turned on under Administrative tools you must restart all these services

    1. Container Manager Services
    2. HV Host
    3. Virtual Disk
    4. Hyper-V Virtual Machine Manager
    5. Hyper-V Host Compute Service
    6. Network Virtualization Service
    [*]Do this in the following order

    1. Right click over (Network Virtualization Service) click restart and wait.
    2. Right click over (Virtual Disk) click restart and wait.
    3. Right click over (Hyper-V Virtual Machine Manager) click restart and wait
    4. Right click over (Hyper-V Host Compute Service) click restart and wait
    5. Right click over (Container Manager Services) click restart and wait

    Check these services are still on

    Application Guard Container Service (If installed)

    Remote Procedure Call (RDC) (""This must be running as most of the others rely upon its function it should never be disabled"")

    Once they are checked start sandbox and it should open up if it does restart your computer to ensure the services are still functional are a restart of computer this should also be done if sandbox does not start up once these services are restarted
    and checked.

    Created By Eric O'Malley

    17th June 2019
     
    viennafiji, Oct 22, 2020
    #3
  4. Can't start the Sandbox / Container Manager Services

    error ox800706d9 sandbox not work

    For Windows 10 1903 sandbox wont start errors all you do is just restart the following service under Administrative tools



    Container Manager Services.



    then reopen sandbox should start up like normal.

    If it does not start up do the following below.



    If you have Hyper-V installed and Virtual disk is turned on under Administrative tools you must restart all these services



    1. Container Manager Services
    2. HV Host
    3. Virtual Disk
    4. Hyper-V Virtual Machine Manager
    5. Hyper-V Host Compute Service
    6. Network Virtualization Service

    Do this in the following order

    1. Right click over (Network Virtualization Service) click restart and wait.
    2. Right click over (Virtual Disk) click restart and wait.
    3. Right click over (Hyper-V Virtual Machine Manager) click restart and wait
    4. Right click over (Hyper-V Host Compute Service) click restart and wait
    5. Right click over (Container Manager Services) click restart and wait



    Check these services are still on

    Application Guard Container Service (If installed)

    Remote Procedure Call (RDC) (""This must be running as most of the others rely upon its function it should never be disabled"")



    Once they are checked start sandbox and it should open up if it does restart your computer to ensure the services are still functional are a restart of computer this should also be done if sandbox does not start up once these services are restarted
    and checked.



    Created By Eric O'Malley

    17th June 2019

    Windows Sandbox failed to start

    A Work Around

    To get

    Windows Sandbox

    Working again

    Created

    By

    Eric O’Malley

    10/06/2019





    Well I work out a solution to get Windows Sandbox going again it’s not the best solution but work around follow the steps below and hope it works for all of you guys.



    1. The first thing you have to do is turn off Windows Defender Random Folder Protection
      or the anti virus random folder protection.
    2. Next turn off Windows defenders Tamper protection Or the Anti-Virus Tamper protection
    3. Once that turn off Go to Control Panel open it
    4. Location Administrative Tools
    5. Next head to Services and open that
    6. Scroll down to Container Manager Services
    7. Turn off Container Manager Service only
    8. Leave service screen open but minimize it
    9. Next go to control panel location and open File Explorer Options
    10. In File Explorer Options Untick the following:



      • Don’t Show Hidden Files, Folders, or Drivers
      • Hide Empty Drivers
      • Hide Extensions Known Files Types
      • Hide Merge Conflicts
      • Hide Protected Operating Systems Files



    1. Now move File Explorer Options to one side of your screen
    2. Go back to Control Panel
    3. Locate and open Program and Features
    4. Go to Turn Windows Features on or Off
      open it

    5. Scroll down to Windows Sandbox
    6. Untick Windows Sandbox
    7. Click ok to uninstall Windows Sandbox
    8. Close off only the screen that removed Windows sandbox
    9. Next go to your main drive usually C: Drive
    10. Location ProgramData
      • We need to get to this location (C:\programData\Microsoft\Windows\Containters\Sandboxes)



    1. Even open it or expand ProgramData
    2. Locate Microsoft open it or expand
    3. Scroll down to Windows open it or expand
    4. Now go to the folder called Containers
      open it or expand
    5. Now you should see Sandboxes
      • You Should be at this location Now

    (C:\programData\Microsoft\Windows\Containters\Sandboxes)



    1. Now in that folder Sandbox is folder that looks like this



      • 4040f074-2ff6-471c-9f38-4836db85fff6
      • Inside it is sandbox.vhdx



    1. What we need do is delete all the strange folders keys that’s in

    (C:\programData\Microsoft\Windows\Containters\Sandboxes)



    1. If it does not delete just wait a few seconds and try again



    Caution do not delete the folders from recycle bin yet



    1. Next go to the folder below it called
      Zygotes




    (C:\programData\Microsoft\Windows\Containters\Zygotes)



    Repeat the steps you did at Sandboxes and delete the strange folder keys with its contents but do not delete what’s in recycle bin.



    1. Repeat the step you did at Sandboxes and delete the
      strange folder key with its contents

    2. If it does not delete just wait a few seconds and try again
    3. Now move the open explorer screen to one side of the screen
    4. Head back to control panel
    5. Locate and open Program and Features
    6. Go to Turn Windows Features on or Off
      open it

    7. Scroll down to Windows Sandbox
    8. This time re-tick Windows Sandbox and close and allow it to reinstall the sandbox
    9. Close only the install screen
    10. Go back to services and Restart Container Manager Service
    11. Leave Services screen open move it to once side again.
    12. We now head to Start then Settings
    13. Scroll until you find Windows
      Sandbox click it twice.
    14. Wait and see how the screen opens if it give you another error
      repeat this process
    15. When you open Windows Sandbox it should
      hang for 5 to 10 minutes without any error message
    16. What it’s doing is rebuilding its image then it opens back to what it was in default settings.
    17. Once you have sandbox reopened and its got the icons load close it pressing the
      red X
    18. Then reopen Windows Sandbox to see if it opens up again.
    19. If it does you fixed it.
    20. Now we can turn back on
      • Windows Defender Random Folder Protection
        or the anti virus random folder protection



      • Windows defenders Tamper protection Or the Anti-Virus Tamper protection



    1. Retest Windows sandbox will open again with the above
      turned on
    2. If it does the next thing is to restart your computer and
      Repeat the opening of Windows sandbox.
    3. Once all is well your right to continue
    4. You can delete the folders in your recycle bin too.



    Created by

    Eric O’Malley

    10/06/2019
     
    viennafiji, Oct 22, 2020
    #4
Thema:

Can't start the Sandbox / Container Manager Services

Loading...
  1. Can't start the Sandbox / Container Manager Services - Similar Threads - Can't start Sandbox

  2. Can't execute Sandox - Error in service "Manager Service" - Not running and can't start...

    in Windows 10 Gaming
    Can't execute Sandox - Error in service "Manager Service" - Not running and can't start...: Hi,When I try to run sandox to I receive the error "Service Manager Service - Not running and can't start manually".This utility is sometimes very usefull, and it already worked on my laptop.I already upgrade to Windows Insiders Beta, but the error continues.Can someone...
  3. Can't execute Sandox - Error in service "Manager Service" - Not running and can't start...

    in Windows 10 Software and Apps
    Can't execute Sandox - Error in service "Manager Service" - Not running and can't start...: Hi,When I try to run sandox to I receive the error "Service Manager Service - Not running and can't start manually".This utility is sometimes very usefull, and it already worked on my laptop.I already upgrade to Windows Insiders Beta, but the error continues.Can someone...
  4. Sandbox won't start

    in Windows 10 BSOD Crashes and Debugging
    Sandbox won't start: I'm running Windows Version 10.0.18363 Build 18363. It's been awhile since I enabled and used the sandbox, and I wanted to use it yesterday. I enabled the necessary virtualization and sandbox components. When I run the sandbox, the virtual machine screen comes up to...
  5. Is it safe to delete baselayer and sandbox from Containers Folder

    in Windows 10 Virtualization
    Is it safe to delete baselayer and sandbox from Containers Folder: First post. Hello everyone and Happy New Year. I made the mistake of following the tutorial to enable Sandbox. It failed miserably, with different errors at different times such as the common Error: 0x80072746. So I disabled Sandbox but i still have this garbage partition...
  6. Is it safe to delete baselayer and sandbox from Containers Folder

    in Windows 10 Support
    Is it safe to delete baselayer and sandbox from Containers Folder: First post. Hello everyone and Happy New Year. I made the mistake of following the tutorial to enable Sandbox. It failed miserably, with different errors at different times such as the common Error: 0x80072746. So I disabled Sandbox but i still have this garbage partition...
  7. Create Windows Sandbox configuration files with Sandbox Configuration Manager

    in Windows 10 News
    Create Windows Sandbox configuration files with Sandbox Configuration Manager: Sandbox Configuration Manager is a free program for Microsoft's Windows 10 operating system that helps users of the system create sandbox configuration files. Windows Sandbox is a new feature of Windows 10 version 1903 that uses Windows Containers to provide the sandbox...
  8. Create Sandbox in Windows 10 using Sandbox Configuration Manager

    in Windows 10 News
    Create Sandbox in Windows 10 using Sandbox Configuration Manager: [ATTACH] [ATTACH]Windows Sandbox is a lightweight desktop environment which makes sure that you can run applications in isolation. The arrangement makes sure the app doesn’t get access to core Windows files and other system files. That said, it’s not straightforward to [...]...
  9. Sandbox wont start

    in AntiVirus, Firewalls and System Security
    Sandbox wont start: I get this error when I try to open sandbox Windows Sandbox failed to start. Error 0x80070015. The device is not ready. I googled but a fix for enable volume shadow copy service did not fix the problem, any advise ? it work on my friend PC !! 134322
  10. Container image Manager

    in Windows 10 Customization
    Container image Manager: i am using Windows 10 Insider Preview 17730.1000 (rs5_release) and when i go to control panel>uninstall programs>turn window features on and off> Container image Manager is greyed out (meaning I cant install) and when highlight it says Container image Manager can not be...

Users found this page by searching for:

  1. container manager service en français