Windows 10: I installed windows using a removable USB flash drive and now it's my primary, active...

I have two other drives, as I will screenshot below. An SSD C drive and HDD E drive which I would rather boot from, so I can remove this USB stick.


Presumably moving the bootmgr etc files across and forcing those as an active partition once formatted won't fix my problem? I'm very new to all this, so apologies.


I think when I originally went into the BIOS to make the USB highest boot priority for installing windows I maybe messed something up. Any help will be appreciated.



:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Installing Windows 7 via USB flash drive!

Its weird tho cause I have no problem with installing from disc. I did change it back to boot from HDD. I really dont want to uninstall all my components, kinds defeats the purpose of installing from usb. it would take longer to disconnect and reconnect after install then it would to just install from dvd.

Do you think its beacuse the drive was formated in ntfs, thats the only step I did different from the OP. Well that and the bootsect /nt60 command before coping files.

heres they way I went, probly have to try it fat32

launch diskpart.exe)
select disk 1 (or your USB drive number, use list disk to get it)
clean
create partition primary
select partition=1
active
format fs=ntfs
assign
exit

Now that the drive is boot aware, we have to initialize its boot sector with the Windows boot manager (BOOTMGR), using the Bootsect.exe utility located in the boot directory of the Vista installation DVD. We have to tell the utility that our target drive is NTFS formatted:

bootsect.exe /nt60 f:

 

Installing Windows 7 via USB flash drive!

i have been installing Windows 7 Ultimate x86 OEM from my Kingston G2 8gb usb for over 6month now, and it's formattet as NTFS but you need to active the partition on the usb flash drive to get it to boot propperly and give it the barcode that the Windows 7 disc have.

i have use this guide several times but once the usb flash drive's partition is activated you never need to do that again.

Guide: How to Install Windows 7 From USB Drive without Windows 7 iso dvd - Blogsdna.com