Windows 10: after factory reset blue screen says boot menu

Leveno setup utility screen says hard disk not installed

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Factory resetting only leads to the advanced startup menu.

So when I click on Factory reset, it restarts the PC and says "Resetting your pc", at 50% it just exits to the advanced startup menu, and I have no idea why. I have tried everything:

• Running various CMD repair commands
• Using the Tweaking.com tool
• Restored my computer to a different period
• Booted into safe mode
• First going to advanced startup > Factory Reset

None of these have worked, so im at a loss.

 

Factory Reset Win 7 (without disc)

Download an ISO of the Avira AV boot CD, burn it on your own computer, and then boot from that CD on your mom's computer and run a cleanup.

Seriously, you should just download a Windows disc and format the laptop. Best and easiest course of action.

"Information:
Many Toshiba laptops come with the factory software recovery image stored in a special (hidden) area on the hard disk. From this special hidden image, you can restore your computer to its factory-fresh software condition by following these steps:

To restore the original factory software image on your computer follow these steps:

• Make sure the computer is turned off ("Shut-down" from the Windows Start menu)
• Remove any peripherals such an external mouse, keyboard, monitor, USB flash drive etc.
• Make sure the AC Adapter is plugged in and working.
• Press and hold down the 0 (zero) key on the keyboard while powering on the computer. Release it when the recovery warning screen appears.
• If the recovery process offers a choice of Operating Systems, select the appropriate one for you.
• A warning screen appears, stating that when the recovery is executed all data will be deleted and rewritten.
• Click Yes to continue.
• When the Toshiba Recovery Wizard opens select "Recovery of Factory Software" or the appropriate option for your needs.
• Continue to follow the directions restarting as necessary.

Please note that the process may vary slightly from machine to machine, that you may be asked to insert disks (multi-disk packages) and that the process may take one to two hours to complete. The recovery process will require you to restart your computer several times.

As you use the recovery process you will have several options. One of these may be to create a custom size partition. Follow the directions on screen for this and other options as prompted. When in doubt, it's usually best to accept the default, or pre-selected option."

If you are incapable, or uncomfortable with following any of the recommendations on how to restore the laptop, then I recommend you take it to your local IT guy and ask him to do it for you. Sometimes the best of us have to visit a ripoff merchant to get something fixed, or even just tested...