Windows 10: Cannot print 0x00000bbb even after several formats

Hey,

as you can tell by the title, i cannot print. i've tried literally every suggestion on the internet, but nothing works. you can also see ive tried reformatting many times. i have never seen this before, it worked fine when i was using windows 7. i first noticed it about a week and a half ago, on 20h2 v2. so i tried 20h2 v1 on a clean install. then i tried 1909 which im using right now and it still has the same error.


i have two questions:

1 what could be causing this, and
2 how the hell does this persist across reformats


in case you're wondering, it works fine on other computers, and an install i have an another disk. just not on this one. this problem is making me really angry

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Unable to print after a windows 10 upgrade - 0x00000bbb Unable to create a print job

Hi! I recently upgraded to Windows 10 from Windows 7 a few days ago. I have a Canon MF8200C Series printer configured for use by this home pc. The printer is connected via ip (local lan). The printer worked fine on Windows 7 for years. After upgrading
the pc to Windows 10, I've been unable to print. I receive a "operation could not be completed error (0x00000bbb). Unable to create a print job" message when attempting to print a test page via the "Printers & Scanners" UI.

In C:\Windows\System32\spool\PRINTERS, I see a file called FP00000.spl appear after attempting to print a test page. The file is 0 bytes, with the file owner as SYSTEM.

So far, I've attempted to:
1) stop the spool service and remove the file from C:\Windows\System32\spool\PRINTERS, then restart the spool service and try again. then restart the pc.
2) removed the printer and attempted to rediscover (successful) and reinstall the printer (successful). then attempt to print a test page.
3) adjusted the permissions to C:\Windows\System32\spool\PRINTERS for all users to "Full Control", then restart the pc and tried again.
4) remove the printer, install the latest drivers from Canon's website (MF8200CMFDriversV2085W64usEN, if necessary to know) for the MF8200C Series printer, then restart the pc and tried again.

5) contacted Microsoft Advisors (via the live chat) for help earlier today, who suggested copying PrintConfig.dll (it was 2.74MB) from C:\Windows\System32\spool\drivers\W32X86\3 to C:\Windows\System32\spool\drivers\x64\3 and restart the pc and tried again.

6) went into Print Management (printmanagement.msc) and found ghost printers (Printers that do not appear in the Windows 10 "Printers & Scanners" UI, but are registered in the OS nonetheless). I removed all ghost printers, all their drivers, and all the
ports in use by the ghost printers. I then tried a fresh install of the printer drivers from Canon, and attempted to print a test page.

all of these attempts result in the same condition: Windows reporting "Operation could not be completed error 0x00000bbb. Unable to create a print job" when attempting to print a test page.

I'm convinced the problem is _not_ with the printer. There's another pc in my home running Windows 10 that is able to print to this printer without any issue, and I've successfully printed to this printer on this pc pre-upgrade to Windows 10. At this point
i'm stuck and could use additional help. Any thoughts are appreciated!

 

Print to PDF missing in Printer List

Hi William,

We suggest that you disable and re-enable the Print to PDF feature. Here are the steps:

• Click on the Start menu and type in Windows Features.
• Choose Turn Windows features on or off.
• On the next window, find Microsoft Print to PDF and disable it. Click
  OK to save changes.
• Restart your PC.
• Repeat the same steps to re-enable Microsoft Print to PDF.

If the issue persists, we suggest that you perform the troubleshooting steps suggested on the link below under
Advanced:

Fix printer problems

Regards.