Windows 10: Putty Installation issue

Please, I am trying to install putty on my laptop, after installation, I tried to open the PUTTY.exe file and this message was displayed "This app can't run on your PC, to find a version for your PC, check with software publisher"


Please, what version will run on my laptop intelR core TM i7-6500U CPU @ 2.5GHz as I really need this for school work.


Please I need urgent help

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

unable to connect to my switch using putty

Hi,



Before we proceed, I need more information to help you better.

• What exactly do you mean by unable to connect to my switch using putty?
• What is the exact issue that you’re facing with USB?
• Are you not able to connect any devices through devices?
• Did you make any changes prior to this issue?

I suggest you to follow the methods below and check if it helps.

Method 1: Run the Hardware and devices troubleshooter.

Windows 10 has a built-in troubleshooter to check and fix issues with hardware and devices. I would suggest you to run this troubleshooter to check if the issue is with your USB. Refer these steps:

• 
  Press Windows key +X, select
  Control panel.
  
• 
  Change the view by option on the top
  right to Large icons.
  
• 
  Click on troubleshooting and click on the
  view all option on the left panel.
  
• 
  Run the Hardware and devices troubleshooter.
  

Method 2.Try updating the latest USB devices from the manufacturer's website and check if the issue persists.

Follow the steps to update the USB drivers:

a. Press Windows key + X key and click
Device Manager.

b. Expand the USB driver.

c. Right-click on the USB and click on
Update driver software.

d. Restart the computer and check.



Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.