Windows 10: Windows is still setting up the class configuration for this device Code 56 on Realtek PCIe...

Discus and support Windows is still setting up the class configuration for this device Code 56 on Realtek PCIe... in Windows 10 Network and Sharing to solve the problem; I suddenly lost internet connection in my PC a few days ago. I checked with my phone and the internet was still working so the problem was narrowed... Discussion in 'Windows 10 Network and Sharing' started by Miguel Corpus, Mar 3, 2021.

  1. Windows is still setting up the class configuration for this device Code 56 on Realtek PCIe...


    I suddenly lost internet connection in my PC a few days ago. I checked with my phone and the internet was still working so the problem was narrowed down to my PC and the ethernet cable. I've done network reset, uninstalled windows updates and tried to install a new driver but none of it worked. The only adapter that I see on my device manager is the Realtek PCIe adapter but it doesn't show on the change adapter options in windows settings. On the ethernet port, there are two LED's. One of it is orange which means the connection/speed is around 1 Gbps data rate and the other LED blinks from time to time which means that there is data transmission occurring. I'm not entirely sure if this cancels out the possibility that the motherboard itself is defective. Unfortunately, I don't have a system restore point to rollback to a state when the PC was fine. I tried testing with another ethernet cable and it still didn't work. I checked for any VPN's that may have been present but found none.

    :)
     
    Miguel Corpus, Mar 3, 2021
    #1

  2. Ethernet driver thrwing an error "Windows is still setting up the class configuration for this device. (Code 56)"

    Hi,

    I had to reinstall the RealTek Ethernet driver on my Windows 10 [1803] 64 Bit V5.3 2019 machine

    The device manager shows the status as "Windows is still setting up the class configuration for this device. (Code 56)"

    I do not have any VPN connection

    I disabled Anit virus and tried installing the driver and still got the same error

    Any suggestion to resolve the issue

    Thanks
     
    Mahesh Subrmaniam, Mar 3, 2021
    #2
  3. MJadhav Win User
    Windows is still setting up the class configuration for this device. (Code 56)

    Hi,

    My windows 10 system was working fine, but after windows update, TAP-Windows Provider V9 network not able to reinstall.

    TAP network Adapter failed to configure with message "Windows is still setting up the class configuration for this device. (Code 56)"

    Same network adapter was working fine on the same system. Also verified same adapter on another windows system also works fine without any issue.

    This issue started after windows update. Before update same TAP adapter install-uninstall was working on the same system without any issue.

    Also do not wanted to reset network or revert windows update as per solution provided in another forum topics due to other applications working fine on the system.

    Thanks and Regards,

    Manish
     
    MJadhav, Mar 3, 2021
    #3
  4. Eric Ber Win User

    Windows is still setting up the class configuration for this device Code 56 on Realtek PCIe...

    What does Windows is still setting up the class configuration for this device. (Code 56) mean?

    Hi,

    Conflicts with a third-party VPN software is one of the possible reasons why you are having a "Windows is still setting up the class configuration for this device (Code 56)" on each of the network adapter in the Device Manager. May we know if you have a third-party
    VPN software installed? If yes, kindly try to uninstall the software, and restart the computer, and check if you will still encounter the same issue.

    Should you need further assistance, don't hesitate to get back to us.
     
    Eric Ber, Mar 3, 2021
    #4
Thema:

Windows is still setting up the class configuration for this device Code 56 on Realtek PCIe...

Loading...
  1. Windows is still setting up the class configuration for this device Code 56 on Realtek PCIe... - Similar Threads - still setting class

  2. Windows is still setting up the class configuration for this device code 56

    in Windows 10 Gaming
    Windows is still setting up the class configuration for this device code 56: Whenever I try to connect to the Internet on my PC via USB tethering on my phone, it doesn't do anything and when I check device manager to check what's wrong, the driver for my phone says that Windows is setting its class configuration of the device. the same error as...
  3. Windows is still setting up the class configuration for this device code 56

    in Windows 10 Software and Apps
    Windows is still setting up the class configuration for this device code 56: Whenever I try to connect to the Internet on my PC via USB tethering on my phone, it doesn't do anything and when I check device manager to check what's wrong, the driver for my phone says that Windows is setting its class configuration of the device. the same error as...
  4. "Windows is still setting up class configurations for this device Code: 56" After...

    in Windows 10 Drivers and Hardware
    "Windows is still setting up class configurations for this device Code: 56" After...: After performing a network reset in settings, I went back into device manager to check if anything was resolved, but my TP-Link Archer T4E "TP-Link Wireless PCI Express Adapter" and my integrated ethernet on my motherboard "Realtek PCIe GbE Family Controller" drivers were not...
  5. "Windows is still setting up class configurations for this device Code: 56" After...

    in Windows 10 Network and Sharing
    "Windows is still setting up class configurations for this device Code: 56" After...: After performing a network reset in settings, I went back into device manager to check if anything was resolved, but my TP-Link Archer T4E "TP-Link Wireless PCI Express Adapter" and my integrated ethernet on my motherboard "Realtek PCIe GbE Family Controller" drivers were not...
  6. Windows is still setting up the class configuration for this device. Code 56

    in Windows 10 Network and Sharing
    Windows is still setting up the class configuration for this device. Code 56: Hi, My windows 10 system was working fine, but after windows update, TAP-Windows Provider V9 network not able to reinstall. TAP network Adapter failed to configure with message "Windows is still setting up the class configuration for this device. Code 56" Same network...
  7. “Windows is still setting up the class configuration for this device (code 56)

    in Windows 10 Ask Insider
    “Windows is still setting up the class configuration for this device (code 56): Hello people, so I upgraded to windows 10 pro from windows 10 home and now my internet adapters no longer work I’ve looked everywhere,watched every video,tried everything and nothing’s worked I can no longer connect to Internet via Ethernet or wireless connection and need...
  8. Windows is still setting up the class configuration for this device (code-56)

    in Windows 10 Network and Sharing
    Windows is still setting up the class configuration for this device (code-56): I was using a D-LINK dwa-131 nano n usb wifi adapter for the last 6 months. Yesterday i tried to update the driver for the adapter. I downloaded the drivers from http://us.dlink.com/products/connect/wireless-n-nano-usb-adapter/ After the successful installation, the...
  9. Windows is still setting up the class configuration for this device, Code 56

    in Windows 10 News
    Windows is still setting up the class configuration for this device, Code 56: [ATTACH] [ATTACH]If the internet is not working on your PC and you see an error message called Windows is still setting up the class configuration for this device (Code 56), you need to check out these solutions. This problem happens with [...] This post Windows is still...
  10. Help! Windows is still setting up the class configuration for this device. (Code 56)

    in Windows 10 Network and Sharing
    Help! Windows is still setting up the class configuration for this device. (Code 56): My computer was working fine with internet access, while updating the network drivers I got disconnected from my home wifi but the update failed in the end. I know people talked about this and found that they had third party VPN running but I don't have any VPN running. I...