Windows 10: No internet on ethernet

Ibuypower PC
Windows 10
5950x
MPG X570 Gaming edge


Hey everyone just got a new PC. Wifi works fine but for some reason, ethernet gives me no internet.

I have made sure it's not the cable, tried a different cable and a different pc. They work on the other pc. I have restarted the router and modem.

I downloaded the latest drivers and bios for the computer.

I tried to diagnose and repair and they find no issue with the device and it's working properly.

Its driving me crazy and I would appreciate some help!
Thank You

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Changing internet type on a internet passthrough ethernet connection

Hi SanJ16,



Thank you for writing to Microsoft Community forum.



You may try the following steps on your laptop and check if it works.

1. Open ‘Settings’ and choose ‘Network and Internet’.
   
2. Click on ‘Ethernet’ and tap ‘Properties’ for the network connection.
   
3. Set it to ‘Private’ and turn on ‘Make this PC discoverable’.
   
4. Close settings when finished.
   

Hope it helps,

 

"No Internet Access" on Ethernet and Wireless - Windows 10

Steps taken to resolve:

• Downloaded from Realtek and installed Windows 10 driver for Realtek PCIe FE Family device
• reset winsock and ip4 and ip6.
• reset DNS cache
• forced media connection by changing ip4 to fixed ip address, gateway, and dns server. Able to ping other devices on network - including gateway, but could not connect to internet. Diagnose unable to find issue with connection.
  • "ipconfig /release" message is "no operation can be performed on (adapter name) while it has its media disconnected."
• when using DHCP, do not receive response from default gateway, so ipconfig has strange addresses. Diagnose returns:
  • "Ethernet" doesn't have a valid IP configuration.
• all other computers on network able to use DHCP for addresses.

trudging through topics on tech forum(s) to find other solutions. Need suggestions on resolution.