Windows 10: Cannot Get Teredo Adapter

I've literally tried everything imaginable and no matter what i do i cannot seem to get the teredo to pop up in the menu on add legacy hardware. it isnt in device manager and it isnt popping up no matter how many times i restart my pc, follow all the guides ive see online. etc. please help

:)

 

Microsoft Teredo Tunneling Adapter not Found

Hi,

It started off from teredo unable to qualify for Xbox connection.

Then, I tried following tons of suggestions through showing hidden drivers in Device manager, changing DisabledComponents value to 0.

However, I still cannot find Microsoft Teredo Tunneling Adapter.

I tried to install it by adding legacy hardware with all ways, but there was no Microsoft Teredo Tunneling Adapter in the list of the Microsoft Network Adapter .

 

Teredo Adapters not installed

Hi,

Incorrect configuration setting is one of the possible reason why you're unable to install the Teredo Adapters on your computer. To help you resolve this concern, we suggest that you follow the solutions provided on the link below:

Click here

You may also check out this
link for additional troubleshooting steps.

If the issue persists, we highly recommend that you contact your router manufacturer to help you install the Teredo Adapter on your device.

Kindly notify us with the results.

 

Missing Microsoft Teredo Tunneling Adapter from Legacy Hardware

Hello,

Please try these suggestions:

Method 1:

Step 1: Modify TCPIPv6 Parameters through Windows Registry

1. Press “Windows” + “R” keys to load the Run dialog box.Type “regedit” and press Enter.
2. Inside Windows Registry, navigate (from the left pane) and highlight this key.
3. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
4. At the right pane, double-click to modify the DisabledComponents key.
5. Set the DisabledComponents Value data to 0 (Zero) and select OK.
6. Close Registry Editor.
7. Restart your computer.
8. Navigate to device management.
9. Check if the Teredo tunneling adapter exists and working in device manager. To do that:

• From the View menu choose Show hidden devices.
• If the device manager's screen doesn't show any errors (and is without an exclamation mark) next to MS Teredo Tunneling Adapter then your problem is solved and the Teredo tunneling should work without problems.

If you face a screen with a yellow exclamation mark next to Microsoft Teredo Tunneling adapter.

Step 2: Uninstall all Teredo Tunneling Adapters & Interfaces.

1. Right-Click and Uninstall the Teredo Tunneling Pseudo-Interface.
2. Uninstall also all Microsoft Teredo Tunneling Adapters (e.g. Microsoft Teredo Tunneling Adapter #2 or #3 or #4, etc.)
3. Re-install Microsoft Teredo Tunneling Adapter by following the steps from this tutorial: How to install Microsoft Teredo Tunneling Adapter
4. If after re-installing teredo tunneling, you still have problems then proceed to Step 3.

Step 3. Enable Teredo Client using NETSH command

1. Right click at Command Prompt and select Run as Administrator.
2. At command prompt window type the following commands in this order and press Enter after typing each one of them.

netsh

int teredo

set state disabled

int ipv6

set teredo client

3. Close command prompt.

4. Open Device manager.

5. Select View > Show Hidden Devices. The Teredo Tunneling Pseudo Interface reappears and should be working without problems now.

Method 2 (not work in Windows 10 Home):

Open Group Policy Editor by running gpedit.msc command. Under Computer Configuration in the tree view, expand Administrative Templates then click All Settings. Look for "Set Teredo State", then double-click that. You will then enable the
policy and set the state below to "Enterprise Client" from what it was before in the dropdown menu under "Select from the following states".

Hope this helps!

References:

1. https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/how-to-install-teredo-tunneling-pseudo-interface/62790531-c342-4c5b-b367-542784ae768f

2. Teredo Tunneling Adapter Is Missing