Windows 10: Monitor not connecting

Used VGA cable to connect a second monitor to my laptop. Monitor shows "no signal". Screen resolution page on laptop has the monitor there, but it is grayed out and I cannot do anything. Went on the monitor's menu, and "VGA Settings" is grayed out. I have no idea where to start with trying to get this to work.

:)

 

i have a problem to connect 2 monitors.

Hi Ron,

Thank you for posting your query in Microsoft Community.

• What changes did you make in the BIOS? As making the changes in the BIOS is only recommended by Microsoft if done by the manufacturer.
  

• How are you connecting to the 2nd monitor?

I suggest you to follow the steps from this article below:

Windows help & learning - Microsoft Support

[Applies to Windows 10 as well]

Regards.

 

Things to do once connected new G-Sync monitor

I'm getting my G-Sync monitor today.

I think I have to take the following steps:

• Connect 1440p G-sync monitor with DP cable
• Connect second 1080p 60Hz monitor by HDMI
• Startup PC
• Reinstall display driver
• Restart PC (I always do that after display driver install)
• Activate G-Sync in NV control panel (I believe also V-Sync is auto on after that?)
• Set my 1440p monitor from 1080p to 1440p
• Calibrate my 1440p monitor

Also ingame, I should turn off V-Sync?
Are there any problems running a second 60Hz 1080p monitor?

Is there anything else I should do/know?

 

3rd monitor doesn't connect

Hi,

Thank you for posting your query on Microsoft Community.

To better understand your query, kindly reply to the following questions.

1. Did you try setting up the cables again?

2. Did you try giving the recommended resolution and check if the monitor is detected?

I would suggest you to make sure that the monitors are connected to the correct video port.

However, you can go to the device manager and disable the monitor which is not working.

Follow the steps below.

• Press Windows key + X key and click on
  Device Manager.
• Expand the Monitors.
• Right-click on the monitor and select Disable.
• After sometime, try re-enabling it and check if the device gets detected.

Hope this helps. Please respond if you have further related queries.

Regards,