Windows 10: External Hard drive Accidentally changed to Disk Partition

A day or go I got a pop up on my windows pc that asked me what I wanted to do with the storage on an external hard drive I was using. I clicked on an option that seemed to be the one where it would keep the hard drive as is but now it wont appear under devices and drives. It says all the space is allocated but it is now labeled as a storage pool and as a storage space protection partition. Is there any way I can convert it back to being a normal disk again? There are also some files on there I dont want to delete. Disk 1 is the problem disk

:)

 

external hard drive

Hi Chrpee,

If you can't find external hard drive on Disk management than the next step is using the diskpart via command line, please follow the steps below:-

On the keyboard hit ((Windows logo key + R key)) than type ((CMD))

Now the windows command line will appear, the next steps is to type ((diskpart))

After that type ((list disk)) to show you the list of hard disks with partitions

If you found your external hard drive one of the list than you need to type ((select disk number)), note: the number is a disk number

Once you selected the hard disk or partitions than type ((clean))

than type ((create partition primary))

than type ((select partition 1))

than type ((active))

than type ((format fs=ntfs quick))

than type ((assign))

last type ((exit))

Check if the external hard drive appeared, if not please see the link below for more info and let me know if you need any assist

https://uk.pcmag.com/dvd-burners/120624/what-to...

 

W7 Hard drive partition issue

to get rid of that 100 meg windows partition that setup creates for you on a new install on a blank hdd:

- press shift+f10 when on the partition management screen in setup <-- this opens a command prompt
- diskpart <-- start the windows command line partition management tool
- list disk <--- list the installed hdds in this computer for the next step
- select disk 0 <- might have to replace 0 with the number of the correct disk
- clean <-- this will erase all data on the disk you selected one step up- dont use the wrong disk!
- create partition primary <- creates a primary partition taking up all space on the drive, adjust the command if necessary
- exit, exit to exit diskpart and the command prompt
- click refresh in partition manager and select your newly created partition and install to that

 

remove external hard drive partitions

Hi,

Thank you for posting your query on Microsoft community.

If you are logged in as an administrator, you can repartition your hard disk by using the Shrink feature in Disk Management. You can shrink an existing partition or volume to create unallocated disk space, from which you can create a new partition
or volume.

You may follow the step below and check if it helps:

• 
  Connect the external hard drive.
  
• 
  Press Windows Key and click on Disk Management.
  
• 
  Right-click the volume you want to shrink, and then click
  Shrink Volume.
  
• 
  Follow the instructions
  

You may also refer to the steps below and check if it helps:



Open cmd with admin rights

1. Run Diskpart application by typing Diskpart

2. In the “Diskpart” prompt, enter rescan command and press Enter key to re-scan all partitions, volumes and drives available.

3. Then type in list disk and press Enter key to show all hard disk drive available.

4. Select the disk that contains the partition you want to remove. Normally, with just 1 hard disk, it will be disk 0. So the command will be:

select disk 0

5. Finish by Enter key.

6. Type list partition and press Enter key to show all available and created partition in the disk selected.

7. Select the partition that wanted to be deleted by using the following command, followed by Enter key:

select partition x

where x is the number recovery partition to be removed and unlocked its space. Be careful with the number of this partition, as wrong number may get data wipes off.

Finally, type in delete partition override and press Enter key.



Disclaimer: Be sure to back up any data you want to keep before you begin.



Hope this helps to resolve your issue. If the problem persist please revert back to us we are glad to help you.