Windows 10: frames droping alot in game after pc reset

so i have a amd radeon rx 6600 and i just reset my whole pc download the right drivers had everything installed changed no settings and only have fortnite installed i always have had it set to 240fps and i open the game and in the menu when moving it around the menu my frames would start dropping to 50 40 30 10 fps and its never done that before and in game it would do the same thing unless i were standing still not moving at all or even if theyre were 2 players in front the fps would drop alot i searched videos and used the lowest setting and its never done this i just had bought the graphics

:)

 

OVERHEATING ALOT SLOWS DOWN GAMES

HI i bought this laptop back in 2012 windows 8 i used it alot for the first 3 years then i stopped for the next 4 years didnt even touch it march of this year i opened it it had alot of problems fixed almost each of them one is remaining
i don tknow what do it overheats alot when i play games which makes games drop speed slower upto 30 frames per second what should i it extremely overheats while playing games the fan is working tho it gives alot of heat

BUT I HAVE NOT CLEANED MY PC FANS SINCE I BOUGHT IT

 

Low frames on Gaming PC

Hey

My MSI GE72VR Apache Pro, laptop just started to have Counter Strike: Global Offensive frames drop to around 35. My frames have went from around 250+ to then 60 then to 35 frames. I don't know whats happening getting my computer maintained and dusted helped
a bit it made the frames go from 60 to around 80 for a bit then it dropped down to 35. In Rust I've been getting 11 frames. Most of my games are unplayable at this point. My in game temp is CPU 83 Celsius for games like Rust. and GPU is around 65 Celsius.
I'm pretty sure i'm getting temperature throttled but I don't know what to do. Please help.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".