Windows 10: after updating to windows 11 2h22 every flash USB I try to connect is not working the flash...

after updating to windows 11 2h22 every flash USB I try to connect is not working the flash is already working on another PC also the Bios boot can recognize the flash but the windws itself cant

:)

 

[SOLVED] "Nothing" works! Cant connect to internet, cant connect usb flash drive, missing drivers...

The USB flash drive might work eventually if you leave it plugged in for awhile. The problem with W7 is that when you plug something new in for the first time, even a generic USB flash drive, it is going to search online for the drivers. Windows 7 is really stupid in this way. Since you don't have an internet connection(because you don't have network drivers installed) you have to wait for the Windows device installer to time out on searching online for drivers before it will load the default built in USB Mass Storage drivers.

When you plug in the flash drive, does the little installing device icon show up in the system tray? If it does, you might be able to click on it and force it to stop looking for the drivers online.

Edit: I just looked at your screenshot more closely. It is listing the USB controller as not functioning properly. So it too might need drivers. But this is more likely the USB3.0 controller, since Win7 doesn't natively support USB3.0. It does natively support USB2.0, so those ports should work without loading drivers. But my suggestion would be to download every driver for your motherboard from the manufacturers website and burn them on a DVD. Then load them from them all from the DVD.

 

USB Flash drive made bootable

Hi Nelson,

Check if there is any slide switch on the side that provides write protection. It show's a closed and open lock on each side. We suggest to follow these steps below:

• Insert the USB flash drive into the USB port.
• Click Start, type devmgmt.msc in the Search textbox and press Enter.
• Find Disk Drives and expand it.
• Find the USB flash drive you want to format, and double-click it. It opens the
  Properties dialog box.
• Click Policies tab.
• By default, the Optimize for quick removal option selected, switch it to Optimize for performance and then press
  OK.
• Now open Computer. Right click on the USB Flash Drive and select Format. The Format dialog box now appears.
• Select NTFS in the File System field.
• Press Start and wait while the process will be completed.

You can also connect the USB drive on a different computer and try formatting.

Let us know how it goes.

 

install.wim is 7GB, how to make a bootable USB flash drive

This is a method to make a ntfs flash drive.

The trial and error step will be booting using Legacy BIOS...

Code:

This is the link:
Guide: How to Format USB Flash Drive Using Cmd - EaseUS

The link did not use active so that is why it is a trial and error step.