Windows 10: Win 10 no longer lists 5.0 router access

Why win 10 doesn't list 5.0 wireless access

:)

 

access BIOS settings in Win 10

I have an 8-year old computer running Win 10. I need to access the BIOS settings. It used to be the holding down the F2 key during startup would bring up the BIOS screen in Windows computers. But this no longer works. A web article listed a complicated
series of steps leading to a reboot . . . but still no access to BIOS. Any suggestions?

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Win 7 and Win 10 on network

I have home network with separate modem, router, and WAP's. My Windows 7 computer does NOT list the Windows 10 computers on network computer list but the Windows 10 computers network list DO list the Windows 7 computer.

Turned off firewalls, gave permissions, shared drives. Nothing allows Win 7 computer to access the Win 10 computers.

Any suggestions for a fix?