Windows 10: why has my pc gone so slow after resetting?

I was playing games with my friends and i shut it down as usual. the next day i powered on the pc and the motherboard logo came up and then just a black screen for 15mins then i restarted my pc then it did the same. i restarted it a couple of times then i went into the bios and got a copy of windows 10 on a usb stick, in the bios i set it to the boot drive and installed windows again and again. it automatically repaired a couple of times but still didn't work. then it loaded i was on the home screen but it was really bad; it took around 10-15mins to turn on and 8mins to turn off, i used a stop

:)

 

Why did the startup window get cleared?

I didn't missed any step, the list was gone and gone , even after using lot of programs the programs were not listed in that list.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

PC slow and not responding

Hi,

To assist you with your concern, we suggest you to run the System Maintenance Troubleshooter to check and see why your PC is running slow and unresponsive. Here are the steps:

• Press Windows Key + X.
• Click on Control Panel.
• Select Troubleshooting. If you cant find the option, click View By and select Large Icons.
• On the left pane, click on View All.
• Click on System Maintenance to run the troubleshooter.

You may also check on the article below for tips on how to improve your Windows 10 PC.

Tips to improve PC performance in Windows 10

Let us know how it goes.